Chapter 21 - At Command Examples; Example 1: When The Ms Has Already Been Powered On; Examples Where A Voice Call Is Originated; Example With Incoming Calls - Multitech CDMA Wireless Modem Reference Manual

C 21 - AT C
HAPTER
This chapter gives illustrative examples of general AT command usage.

Example 1: When the MS Has Already Been Powered On.

AT+CMEE=1
OK
AT+CPAS
+CPAS: 0
OK

Examples Where a Voice Call is Originated.

Example 3: When the MS is powered on.
AT+CMEE=1
OK
ATD18001234567;
OK ATD
+WORG:18001234567
+WCNT:3
Conversation...
ATH
OK ATH
+WEND:10

Example with Incoming Calls

When the MS is Powered On.
AT+CMEE=1
OK
AT+WIND=63
OK
AT+CLIP=1
OK
AT+CNUM
+CNUM: "Phone","8585551212",129
OK
Call the Number from Another MS.
+RING
+CLIP: "8585551212",129
ATA
OK ATA
+WANS
+WCNT:3
...Conversation...
+WEND:6
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
OMMAND
Enable the reporting of mobile equipment errors
Get the MS Status
MS is ready to receive commands
Enable the reporting of mobile equipment errors
Make a voice call
Command is being processed
Indication of call origination sent to the Base Station with dialing string 18001234567
Call Connected with CDMA Service Option 3, Traffic channel established.
Release the call
Command is being processed
Call Ended, end reason 10 (Normal Release).
Enable the reporting of mobile equipment errors
Ask to display the general indications.
Enable the calling line identification presentation.
Query own number.
Incoming Call.
Identification of the remote party.
Answer the call.
Command is being processed.
Call has been answered.
Call Connected with CDMA Service Option 3, Traffic channel established.
Call Ended, end reason 6 (Normal Release), the call has been released by the remote party.
Chapter 21 – AT Command Examples
E
XAMPLES
171