Facility Lock +Clck - Multitech CDMA Wireless Modem Reference Manual

Multi-tech systems cdma wireless modem reference guide
Hide thumbs Also See for CDMA Wireless Modem:
Table of Contents

Advertisement

Facility Lock +CLCK

Description:
This command is used by the application to lock, unlock, or interrogate an ME or network
facility <fac>. When changing a lock state, a password value must be included in the
command even though passwords are not currently enforced for these facilities. Any 4 digit
sequence can be entered for the password value.
This command is also used to allow control of the call barring supplementary service.
Barring calls or querying the status of call barring is possible for Data and Voice Calls,
except Emergency Voice Calls.
Values:
The following <fac> and <mode> values are supported:
"AO": BAOC (Barr Outgoing Calls)
<mode>
0: Allow all outgoing calls
1: Allow outgoing calls only for phonebook entries (use ATD> command) and
emergency voice calls
2: Allow emergency voice calls only
9: Query status
"AI": BAIC (Barr Incoming Calls)
<mode>
0: Allow all incoming calls
1: Allow incoming calls only for phonebook entries (match number in phonebook) and
emergency voice calls
2: Allow emergency voice calls only
9: Query status
Note: Setting this facility to 0 will force the "AO" facility to 0.
"PB": BAMC (Barr Outgoing Phonebook Match Calls)
<mode>
0: Allow all outgoing calls
1: Allow outgoing calls only for phonebook entries
9: Query status
Note: Setting this facility to 0 will force the "AO" facility to 0.
"DT": BADC (Barr Data Calls)
<mode>
0: Allow data calls
1: Barr data calls
9: Query status
<passwd>
Use any four digit value. (e.g. 1234)
Syntax (for Facility Lock):
Command syntax: AT+CLCK= <fac>,<mode>[,<passwd>]
Response syntax: +CLCK: <status>
Command
AT+CLCK?
Note: Get facility lock status
AT+CLCK="AO",1,1234
Note: Bar Outgoing Calls
AT+CLCK="AI",1,1234
Note: Bar Incoming Calls
AT+CLCK="AO",9
Note: Query outgoing call
barring status
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 23 - Sprint® Specific AT Commands
Possible Responses
+CLCK:("AO",1),("AI",1),("PB",1),("DT",1)
OK
Note: Outgoing call barring is enabled, Incoming call barring is
enabled, match string from phonebook is enabled, Data calls are
not allowed
OK
Note: Outgoing calls are barred
OK
Note: Incoming calls are barred
+CLCK: 1
OK
Note: Outgoing calls are barred
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtsmc-c seriesMtmmc-c seriesMtcba-c series

Table of Contents