Reset RLP Protocol Statistics $QCRLPR
Description:
This command is used to zero all the RLP statistics counters. This does not apply to RLP 3
statistics (see $QCRL3R).
Syntax:
Command syntax: AT$QCRLPR
Command
AT$QCRLPR?
Note: Display the current setting
AT$QCRLPR
Note: Reset RLP statistics counter
Dump PPP Protocol Statistics $QCPPPD
Description:
This command is used to dump the PPP statistics in ASCII format to the DTE.
Syntax:
Command syntax: AT$QCPPPD
Command
AT$QCPPPD?
Note: Display the current setting
AT$QCPPPD
Note: Dump PPP statistics information
Reset PPP Protocol Statistics $QCPPPR
Description:
This command is used to zero all of the PPP statistics counters.
Syntax:
Command syntax: AT$QCPPPR
Command
AT$QCPPPR?
Note: Display the current setting
AT$QCPPPR
Note: Reset PPP statistics counter
Dump IP Protocol Statistics $QCIPD
Description:
This command is used to dump the IP statistics in ASCII format to the DTE.
Syntax:
Command syntax: AT$QCIPD
Command
AT$QCIPD?
Note: Display the current setting
AT$QCIPD
Note: Dump IP statistics information
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Possible Responses
ERROR
Note: Command is not valid
$QCRLPR:
OK
Note: Command is valid
Possible Responses
ERROR
Note: Command is not valid
$QCPPPD:
In LCP :0000 Out LCP :0000
....
OK
Note: Command is valid
Possible Responses
ERROR
Note: Command is not valid
$QCPPPR:
OK
Note: Command is valid
Possible responses
ERROR
Note: Command is not valid
$QCIPD:
IP:
InReceives :0000 InHdrErrors :0000
....
OK
Note: Command is valid
152