Request IMSI +CIMI
Description:
This command is used to read and identify the IMSI (International Mobile Subscriber
Identity)
reading the IMSI.
Syntax:
Command syntax: AT+CIMI
Command
AT+CIMI
Note: Read the IMSI
Capabilities List +GCAP
Description:
This command gets the complete list of capabilities.
Syntax:
Command syntax: AT+GCAP
Command
AT+GCAP
Note: Get capabilities list
Repeat Last Command A/
Description:
This command repeats the previous command. Only the A/ command itself cannot be
repeated.
Syntax:
Command syntax: A/
Command
A/
Note: Repeat last command
Phone Offline +CPOF
Description:
This command sends all CDMA software stack tasks offline. AT command can still be
received, however, there is no RF functionality. The AT+CFUN=0 command is equivalent to
+CPOF.
Syntax:
Command syntax: AT+CPOF
Command
AT+CPOF
Note: Stop CDMA stack
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
of the modem. The PIN may need to be entered using the CPIN command before
Possible Responses
+GCAP: +CGSM, +CIS707-A, +MS, +ES, +DS, +FCLASS
OK
Possible Responses
+CIMI: 310008585551212
OK
Note: IMSI value (15 digits)
Possible Responses
Possible Responses
+CPOF:
OK
Note: Command valid
Chapter 4 – General Commands
28