Table of Contents
Advertisement
Set SMS Compose Language and Encoding +WSCL
Description:
The +WSCL command sets the SMS composition language and encoding types. When
composing a message (+CMGS, +CMGW), the SMS language and encoding fields will be
set using the current +WSCL value.
Values:
<lang>
0: Unspecified
1: English
2: French
3: Spanish
4: Japanese
5: Korean
6: Chinese
7: Hebrew
<enc>
0: Octet (or Unspecified)
1: IS91EP
2: ASCII
3: IA5
4: UNICODE
Syntax:
Command syntax: AT+WSCL = <lang>, <encod>
Command
AT+WSCL=1,2
AT+CMGW="8585551212"<CR>
Hello how are you ?<ctrl-Z>
Note: Write a message in English
AT+WSCL=6,4
AT+CMGS="8585551212"<CR>
Ãû×Ö<ctrl-Z>
Note: Send a message in Chinese
Set Timestamp of MT SMS +WSTM
Description:
The +WSTM command sets the timestamp that will be used when the modem receives a
Mobile Terminated SMS. When a new MT SMS message is received the setting of this
command determines if the timestamp that was received with the message is kept, or
modem's CDMA time, which represents the actual time of message arrival is used. When
choosing to use modem's CDMA time, the command gives the option of using local or GMT
time.
Values:
<ts>
0: Original Time Stamp of the received MT SMS
1: Time of arrival – GMT Time
2: Time of arrival – Local Time
Syntax:
Command syntax: AT+WSTM = <ts>
Command
AT+WSTM=2
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
OK
Note: Set language to English, encoding to ASCII
+CMGW: 4
OK
Note: Message stored in index 4
OK
Note: Set language to Chinese, encoding to UNICODE
+CMGS: <mr>
OK
Note: Message sent
Possible Responses
OK
Note: Set MT SMS timestamp to time of arrival (local time zone)
Chapter 8 – Short Messages Commands
67
Advertisement
Table of Contents
