1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Network Card
  5. CDMA
  6. Reference manual

Multitech CDMA Wireless Modem Reference Manual

Multi-tech systems cdma wireless modem reference guide
Hide thumbs Also See for CDMA Wireless Modem:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AT Commands
For CDMA Wireless Modems
Reference Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDMA Wireless Modem and is the answer not in the manual?

Questions and answers

Related Manuals for Multitech CDMA Wireless Modem

Summary of Contents for Multitech CDMA Wireless Modem

  • Page 1 AT Commands For CDMA Wireless Modems Reference Guide...
  • Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.

  • Page 3: Table Of Contents

    Repeat Last Command A/...28 Phone Offline +CPOF ...28 Set Phone Functionality +CFUN ...29 Phone Activity Status +CPAS ...30 Report Mobile Equipment Errors +CMEE ...30 Keypad Control +CKPD ...30 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Contents Table of Contents...
  • Page 4 Chapter 8 - Short Messages Commands ...55 Parameters Definition ...55 Select Message Service +CSMS ...56 New Message Acknowledgement +CNMA ...56 Preferred Message Storage +CPMS...57 Show Text Mode Parameters +CSDH ...57 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 5 Find Phonebook Entries +CPBF ...83 Write Phonebook Entry +CPBW ...84 Phonebook Read +CPBR ...85 Phonebook Search +CPBP...85 Avoid Phonebook Init +WAIP...86 Delete Calls From Phonebook +WDCP ...86 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 6 SIM ToolKit Set Facilities (+STSF)...114 Error Codes...115 SIM ToolKit Indication (+STIN) ...115 Last SIM Toolkit Indication: ...116 SIM ToolKit Get Information +STGI) ...117 Unsolicited Result: SIM ToolKit Control Response (+STCR) ...120 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 7 Command State Inactivity Timer +CQD ...142 Mobile Station IP Address +CMIP...142 Base Station IP Address +CBIP...143 Serving System +CSS ...144 Select Multiplex Option +CMUX...145 Interface Fax Compression +CFC ...145 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 8 Chapter 20 - Reference Information ...166 MS Error Result Code : +CME ERROR: <error> ...166 Message Service Failure Result Code: +CMS ERROR :<error> ...167 Specific Error Result Codes ...167 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 9 Mobile Directory Number +WMDN...190 Serving System +CSS ...191 Packet Zone Identifier +PZID...192 Boot URL +WBURL ...192 Trusted Domain +WTDMN...192 Proxy Address +WDPXY ...193 WIOTA Connection Control +WIOTA...193 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Table of Contents...
  • Page 10 Table of Contents Sprint®. System Selection +WSSS...193 IOTA Error +WOAE...194 Preparing Data Services +WOAP ...194 Please Retry +WOAR ...194 Display PRI Checksum +WSUM ...194 Reset MIN and MDN to factory defaults +WRMM...195 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C...

  • Page 11: Chapter 1 - Introduction

    Processing and the Rm Interface Qualcomm Application Note (CL93-V0327-1 X10): AT COMMANDS FOR DMSS IS-131: Data Transmissions Systems and Equipment – Extensions to Asynchronous Dialing and Control. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 1 - Introduction...

  • Page 12: Definitions

    Over The Air Parameter Administration. An automatic update in internal software parameters (PRL for example) by means of a specially defined CDMA data call that is mobile terminated (MT). Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 1 - Introduction...
  • Page 13 (PDA/Computer) connected to the WISMO Quik. Also see DTE. TON/NPI: Type Of Number/Numbering Plan Identification. V24-V25: A data compression algorithm. V42: A data compression algorithm. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 1 - Introduction...

  • Page 14: Chapter 2 - At Command Features

    • If the command line has been performed successfully, an OK string is returned. In the following examples <CR> and <CR><LF> are intentionally omitted. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C OMMAND EATURES Chapter 2 – At Command Features...

  • Page 15: Chapter 3 - Unsolicited At Result Codes

    Response syntax: +CCED: <requested dump> Example Result +CCED: 1,725,4,65535,6,,0,,,-104,-35,-63 Note: Cell environment description indication in response to AT+CCED=0,1 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C AT R ESULT NVRAM storage area (always “BC” for this response) location of message within storage area Chapter 3 –...

  • Page 16: Call Waiting Indication +Ccwa

    Response syntax: +CDSI: <mem>,<index> Example Result +CDSI: “SR”,5 Note: SMS status report received and stored in “SR” memory at index 5 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes Interface memory.

  • Page 17: Key Press Or Release +Ckev

    Response syntax: +CMT: <oa>, <scts>, <tooa>, <lang>, <encod>, <priority> [,<cbn>], <length> <CR><LF> <data> (text mode) Example Result +CMT: “123456”,”98/10/01,12 :3000+00”,129,1,2,0,”5550000”,5<CR><LF> Hello Note: Incoming message received Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes...

  • Page 18: Incoming Message Stored In Memory +Cmti

    4: unknown. 5: registered, roaming Syntax: Response syntax: +CREG: <stat> Example Result +CREG: Note: Modem has found the home network and is registered. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes...

  • Page 19: Incoming Call +Cring

    Note: RSSI notification Incoming Call +RING Description: This response indicates an incoming call. Syntax: Response syntax: +RING Example Result +RING +RING Note: Incoming Call Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes...

  • Page 20: Call Answered +Wans

    31: Internal Software aborted the origination/call. 32: Maximum Access probes exhausted (The modem failed to contact the Base Station) 34: RUIM not present Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes Possible Responses...

  • Page 21: Feature Notification Message +Wfnm

    This response confirms that a flash has been sent to the base station. See +WFSH command, Chapter 9, for more information on using flash commands. Syntax: Response Syntax: +WFSH Command AT+WFSH Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WORG:18005551212 +WCNT:3 +WEND:29 Note: Call Ended with a normal release...

  • Page 22: General Indicator +Wind

    The network is lost. 256: Reserved 512: Reserved 1024: Corrupted RF calibration values (checksum mismatch) Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C R-UIM Presence Reserved Reserved Indication that the product is ready to process all AT commands Reserved Reserved...

  • Page 23: Call Originated +Worg

    Response Syntax: +WPRV: <prv> Command AT+WPRV=1 <prv> 0: Indicates normal privacy 1: Indicates enhanced privacy Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses WIND: 8 Note: Default 8. (9 if RUIM is present) +WIND: (0-2047) Note: Command accepted.

  • Page 24: Roaming Indication +Wrom

    AT+WSOS Note: Exit Emergency Mode AT+COPS=0,0 Note: While in Emergency Mode, the mode preference is changed, resulting in Emergency Mode being exited Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WROM:1 Possible Responses +WSOS:1 +WORG:911 Note: Unsolicited +WSOS result confirms...

  • Page 25: Current Nam Change +Wnam

    +WMGF Note: Incoming message rejected. Message center notified with “out of resources” message. Message center will attempt to re-send the message at a later time. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WNAM:2 Possible Responses +WVMI: 1,2 Note: 2 messages are in your voicemail box.

  • Page 26: Power Save +Wsps

    Note: Display current power mode state. <state> 0: Leaving power save 1: Entering power save Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 3 – Unsolicited AT Result Codes Possible responses +WSPS: 1 Note: Entering power save mode.

  • Page 27: Chapter 4 - General Commands

    Note: CDMA default alphabet AT+CSCS? Note: Custom character set AT+CSCS=? Note: Get possible values Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C OMMANDS Possible Responses +CGMR: S/W VER: WISMOQ WQ1.1 Mar 20 2002 17:30:00 Note: Software Version WISMOQ, revision WQ1.1 generated...

  • Page 28: Request Imsi +Cimi

    +CPOF. Syntax: Command syntax: AT+CPOF Command AT+CPOF Note: Stop CDMA stack Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +CIMI: 310008585551212 Note: IMSI value (15 digits) Possible Responses +GCAP: +CGSM, +CIS707-A, +MS, +ES, +DS, +FCLASS Possible Responses...

  • Page 29: Set Phone Functionality +Cfun

    Note: Ask for current functionality level AT+CFUN=0 Note: Set phone offline AT+CFUN=1 Note: Set phone ONLINE. A software reset is performed. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 4 – General Commands Possible Responses +CFUN: 1 Note: Full functionality...

  • Page 30: Phone Activity Status +Cpas

    Command syntax: AT+CKPD=<keys> Command AT+CKPD=”*#21#” Note: Key sequence allowed AT+CKPD=1234 Note: Sequence not allowed Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 4 – General Commands Possible Responses +CPAS: <pas> Possible Responses Possible Responses +CME ERROR 3...

  • Page 31: Clock Management +Cclk

    2 with volume level 2. AT+CRMP=0,,,0 Note: Stop the melody. AT+CRMP=? Note: supported parameters Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 4 – General Commands Possible Responses OK or ERROR Note: Date/Time stored – ERROR returned when RTC...

  • Page 32: Ringer Sound Level +Crsl

    AT+CSTA? Note: Get type of address AT+CSTA=? Note: Get supported address types Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 4 – General Commands Possible Responses Note: Current ring playing is muted. Note: Current ring playing with Max. volume.

  • Page 33: View Modem Timers +Wtmr

    Command syntax: AT+WMSN Command AT+WMSN Note: Get the modem SN Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C seconds since modem boot-up total call seconds since modem manufacture (excluding SMS) total calls made since modem manufacture time of the most recent call in seconds...

  • Page 34: Chapter 5 - Call Control Commands

    Note: A semicolon must be used at the end of the AT command to signal phonebook dialing. Otherwise, the command will result in an error. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C ONTROL OMMANDS services.

  • Page 35: Hang-Up Command H

    Command syntax: ATH Command Note: Ask for disconnection ATH1 Note: Ask for outgoing call disconnection Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses +CPBS: ME,11,100 Note: Command executed Note: Command executed...

  • Page 36: Answer A Call A

    ATD1234567; Note: Outgoing voice call while already in a call AT+CEER AT+CEER Note: Ask for reason of release Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses RING Note: Incoming call...

  • Page 37: Dtmf Signals +Vtd, +Vts

    Values: <X>: (0-9, #,*) Syntax: Command syntax: AT+WSDT=<X> Command AT+WSDT=2 AT+WSDS Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses Note: Command valid Possible Responses Starts DTMF tone Stops DTMF tone...

  • Page 38: Redial Last Telephone Number Dl

    Note: Current value ATS0=0 Note: No automatic answer Other S-parameter registers are implemented. See Chapter 17, Basic S-Registers. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WORG: 8585551212 Note: Last call was a voice call. Command valid...

  • Page 39: Incoming Call Bearer +Cicb

    AT+CSNS=2 Note: Force a voice call AT+CSNS? Note: Interrogate value AT+CSNS=? Note: Test command Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses Note: Command accepted Note: Command accepted +CICB: 2...

  • Page 40: Microphone Gain +Vgt

    Command syntax: AT+VGR=<Rgain> Command AT+VGR=2 AT+VGR? Note: Interrogate value AT+VGR=? Note: Test command Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Microphone Relative Gain Step (dB) Possible Responses Note: Command valid +VGT: 2 Note: Current value +VGT : (0-3)

  • Page 41: Microphone Mute Control +Cmut

    Command syntax: AT+SPEAKER=<ActiveSpkMic> Command AT+SPEAKER=1 Note: Speaker ONE and Micro ONE AT+SPEAKER? Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses +CMUT : (0-1) Note: Enable / disable mute +CMUT : 0...

  • Page 42: Echo Cancellation +Echo

    3: Max Sidetone level Syntax: Command syntax: AT+SIDET=<val1>,<val2> Command AT+SIDET=1,0 AT+SIDET? Note: Current value Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 5 – Call Control Commands Possible Responses +ECHO: 0 Possible Responses Note: Command valid +SIDET: 1,0...

  • Page 43: Initialize Voice Parameters +Vip

    Syntax: Command syntax: AT+WTTY Command AT+WTTY Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses Note: Command valid Possible Responses Note: Command valid...

  • Page 44: Chapter 6 - Network Service Commands

    1: Power cycle – this mode persists until power cycle is performed Note: 1: AT+COPS by itself is a short-hand equivalent to AT+COPS=0,0. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands ERVICE OMMANDS command.

  • Page 45: Band Preference +Wbnd

    AT+WBND? Note: Ask for current Band Preference AT+WBND=? AT+WBND=0 Note: Allow Any Band Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +COPS: 0,0 Note: Automatic mode, use PRL order, Permanent...

  • Page 46: Roam Preference +Wrmp

    AT+WRMP=1 Note: Allow Roaming Affiliated Networks AT+WRMP=2 Note: Allow Roaming on Any Network Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +WRMP: 0 Note: Home only +WRMP: (0-2) Note: Home, Affiliated, Any...

  • Page 47: Network Registration & Roaming +Creg

    AT+CREG? AT+CREG=? Note: Example of the unsolicited result code. MS is searching for a base station. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +CREG: 0,1 Note: Command valid...

  • Page 48: Change Nam Selection +Wnam

    Syntax: Command syntax: AT+WCNM Command AT+WCNM Note: Ask for the current NAM Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +WNAM: 2 +WCNM: 2 Note: No unsolicited response indicates that NAM 3 is not valid, thus no change in NAM.

  • Page 49: Emergency Mode +Wsos

    AT+COPS=0,0 Note: Changing the mode preference while in Emergency Mode, will result in Emergency Mode being exited Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +WSOS: 1 +WSOS: (0-0)

  • Page 50: Extended Roam Indication +Wrmw

    Note: Display current setting. AT+WRMW=1 Note: Enable output of ERI 64 through 127. AT+WRMW? Note: Display current setting. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 6 – Network Service Commands Possible Responses +WRMW: (0-1) +WRMW: 0 Note: ERI 64 through 127 suppressed.

  • Page 51: Chapter 7 - Sim Card Operational Commands

    The response ‘+CME ERROR: 13’ (SIM failure) is returned after 10 unsuccessful PUK attempts. The SIM card is then out of order and must be replaced by a new one. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 7 - SIM Card Operational Commands...

  • Page 52: Enter Pin2 +Cpin2

    AT+CPINC Note: Get the number of attempts left AT+CPINC? Note: Get the number of attempts left Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 7 - SIM Card Operational Commands Possible Responses Note: PIN2 code is correct...

  • Page 53: Facility Lock +Clck

    Note: Bar Outgoing Calls AT+CLCK=”AI”,1,1234 Note: Bar Incoming Calls AT+CLCK=”AO”,2 Note: Query outgoing call barring status Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 7 - SIM Card Operational Commands Possible Responses Note: SIM PIN enabled +CLCK:(“SC”,1),(“FD”,0),(“AO”,1),(“AI”,1)

  • Page 54: Change Password +Cpwd

    Note: Get card ID AT+CCID? Note: Get current value AT+CCID=? Note: Get possible value Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 7 - SIM Card Operational Commands Possible Responses Note: PIN1 now 5555 +CME ERROR: 16 Note: PIN incorrect +CPWD:(“SC”,8),(“P2”,8)

  • Page 55: Chapter 8 - Short Messages Commands

    Total number of messages locations in <mem1>. <used2> Total number of messages locations in <mem2. <vp> Validity Period of the short message, default value is 167 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C ESSAGES OMMANDS Chapter 8 – Short Messages Commands...

  • Page 56: Select Message Service +Csms

    AT+CNMI=2,2,0,0,0 AT+CNMA Note: Acknowledge the message received AT+CNMA Note: Try to acknowledge again Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses +CSMS: <MO>,<MT>,<CB> Note: SMS-MO, SMS-MT and SMS-CB support Possible Responses +CMT:”8587351530”,”02/04/03,11 :06...

  • Page 57: Preferred Message Storage +Cpms

    Syntax: Command syntax: AT+CSDH Command AT+CSDH? Note: Current value Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses +CPMS: (“MT”,”BC”,”SR”),(“MO”) Note: Read, list, delete: SMS, CBM or SMS Status Report. Write, send: SMS +CPMS: “MT”,3,30,”MO”,3,30...

  • Page 58: New Message Indication +Cnmi

    TE when <mode> 1…3 is entered (OK response shall be given before flushing the codes) 1: TA buffer of unsolicited result codes defined within this command is cleared when <mode> 1…3 is entered. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands...

  • Page 59: Read Message +Cmgr

    Call Back Number <length>: Length of the text message (in bytes). <data>: Message text Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses AT+CMTI : “MT”,1 Note: message received +CMT : “8585551212”,”98/10/01,12 :30 00”,129,1,2,0,5<CR><LF>...
  • Page 60 SMS Status Report into “SR” memory AT+CMSS=3 Send an SMS previously stored AT+CMGR=1 Read the SMS Status Report Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses +CMTI: “MT”,1 Note: New message received +CMGR: “REC UNREAD”,”8585551212”,...

  • Page 61: List Message +Cmgl

    Note: List read messages in text mode AT+CMGL=”SENT” Note: List stored and sent messages in text mode Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Status of Messages in Memory received unread messages received read messages...

  • Page 62: Send Message +Cmgs

    AT+CMGS="1234",4 <Unicode message><dummy byte> Note: Unicode message with length. Final <dummy byte> (any value) required for message transmission. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses +CMGS:<mr> Note: Message reference output.

  • Page 63: Write Message To Memory +Cmgw

    The maximum count is 65,535 messages. Note: If the “FD” facility is enabled, only the <da> entries in the FDN phonebook can be set. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands...

  • Page 64: Delete Message +Cmgd

    AT+CMGD=3 Note: Delete it AT+CMGD=1,0 AT+CMGD=1,1 AT+CMGD=1,2 AT+CMGD=1,3 AT+CMGD=1,4 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +CMTI:”MT”,3 Note: New message received +CMGR: “REC UNREAD”,”8585551212”, “98/10/01,18 :19 :20”,1,2,0,17 <CR><LF> Message received! Note: Unread message received from 8585551212 on the 01/10/1998 at...

  • Page 65: Select Broadcast Messages +Cscb

    AT+CPMS=”SR” Note: Change preferred memory to Status Report AT+WMSC=0,”UREAD” Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses Note: BC SMS can be received Note: Only Emergency BC SMS can be received.

  • Page 66: Message Overwriting +Wmgo

    Syntax: Command syntax: AT+WUSS = <mode> Command AT+WUSS=1 AT+WUSS=0 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses Note: Next MSG write will be to index 0 +CMS ERROR: 302 Note: Invalid index (out of range)

  • Page 67: Set Sms Compose Language And Encoding +Wscl

    2: Time of arrival – Local Time Syntax: Command syntax: AT+WSTM = <ts> Command AT+WSTM=2 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 8 – Short Messages Commands Possible Responses Note: Set language to English, encoding to ASCII +CMGW: 4...

  • Page 68: Chapter 9 - Supplementary Services Commands

    AT+CCFC=8585551212 Note: Register to an unconditional call forwarding. AT+CCFC=0 Note: Cancel unconditional call forwarding Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 9 – Supplementary Service Commands ERVICES OMMANDS Possible Responses Note: Prefix number set. +WORG:*728585551212...

  • Page 69: Calling Line Identification Restriction +Clir

    Note: Enable CLIP AT+CLIP? Note: Ask for current functionality AT+CLIP=0 Note: Disable CLIP presentation Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 9 – Supplementary Service Commands Possible Responses Note: Command valid +CLIR :<mode> Note: <mode> as defined below...

  • Page 70: Send Flash To Base Station +Wfsh

    AT+WFSH=6195552121 Note: Place first call on hold, connect to second party. AT+WFSH Note: Connect all 3 parties. AT+WFSH Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 9 – Supplementary Service Commands Possible Responses +WORG:8585551212 +WCNT:3 Note: Conversation…...

  • Page 71: List Current Call State +Clcc

    2: mobile originated (MO) call Syntax: Command syntax: AT+CLCC +CLCC: <state>, <mode>, <termination> Command AT+CLCC Note: Seek current phone state Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 9 – Supplementary Service Commands Possible Responses +CLCC: 0,9,0 Note: Command valid...

  • Page 72: Chapter 10 - Data Commands

    Note: Data mode requested AT+FCLASS=2.0 Note: Fax class 2 mode requested AT+FCLASS? Note: Current value Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C OMMANDS Possible Responses +FCLASS: 0, 2.0 Note: If fax class 1 not supported Note: Command valid Note: Command valid +FCLASS: 2.0...

  • Page 73: Cellular Result Codes +Crc

    Command AT+ILRR=0 Note: Local port rate report disabled Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C for normal voice calls for all types of data calls for all types of fax calls for OTAPA calls for markov, loopback, and test calls...

  • Page 74: V42 Bis Data Compression +Ds

    6-250: specifies the maximum string length to be negotiated, (default is 250). Syntax: Command syntax: AT+DS=<dir>,<neg>,<P1>,<P2> Command AT+DS=3,0,4096,250 Note: Set new parameters AT+DS? Note: Current values Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses Note: Command valid +DS: 3,0,4096,250 Note: Command valid Chapter 10 – Data Commands...

  • Page 75: V42 Bis Data Compression Report +Dr

    Note: Display the current value AT+DR=? Note: Display the supported values Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Data compression is not in use Rec. V.42 bis is in use in both directions Rec. V.42 bis is in use in receive direction only Rec.

  • Page 76: Chapter 11 - V24-V25 Commands

    Note: Set values. AT+ICF? Note: Display current settings. AT+ICF=? Note: Display valid parameter ranges. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 11 – V24-V25 Commands OMMANDS Possible Responses +IPR: 9600 Note: Current rate is 9600 bps...

  • Page 77: Dte-Dce Local Flow Control +Ifc

    Note: DCD matches state in accordance with the specified service AT&C2 Note: Wink indicator on channel disconnect Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Transmit data flow control disabled. Use RTS (Request To Send) signal (default) Receive data flow control disabled.

  • Page 78: Set Dtr Signal &D

    Command ATQ0 Note: Return result codes ATQ1 Note: Result codes are suppressed and not transmitted Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 11 – V24-V25 Commands Possible Responses Note: Command valid Note: Command valid Possible Responses...

  • Page 79: Dce Response Format V

    Command ATE0 Note: Characters are not echoed ATE1 Note: Characters are echoed Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses Note: Command is valid (0 means OK) Note: Command valid Possible Responses Note: Audio loopback is on.

  • Page 80: Display Configuration &V

    Note: For the data returned by the ATI6 command, the use of the IS-707 +GCAP command is preferred. Syntax: Command syntax: AT&V Command AT&V Note: Display the active parameter settings Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 11 – V24-V25 Commands Possible Responses &C: 2; &D: 2; … …...

  • Page 81: Request Identification Information I

    This command writes the current configuration to NV. See table in Chapter 20 for a list of items. Syntax: Command syntax: AT&W Command AT&W Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses MODEM 800 1900 S/W VER: WISMOQ … +CGSM, +CIS707, …...

  • Page 82: Chapter 12 - Phone Book Commands

    “MT”: MT (combined ME and RUIM phonebook) “RC”: LIC (ME received calls list) “FD”: FDN (SIM Fix Dialing, restricted phonebook) Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C OMMANDS ME Index range 1 to 100 SM Index range 1 to 150 (SIM card)

  • Page 83: Return Selected Phonebook Locations +Cpbu

    Command syntax: AT+CPBF=”string” Command AT+CPBF=”TES” AT+CPBF=”NEXT” Note: Find entries that start with “NEXT” Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 12 – Phone Book Commands Possible Responses Note: ME phonebook selected +CPBU: (1 –100),32,(0-255),12 Note: 100 locations starting at 1, 32 digits maximum, TON/NPI value range is 0-255, and 12 characters for the text.

  • Page 84: Write Phonebook Entry +Cpbw

    Note: Phone book is full AT+CPBW=,”8585551212”,145,”Text is too long for this ” Note: Write to first location that is open 24 ASCII characters Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 12 – Phone Book Commands Possible Responses...

  • Page 85: Phonebook Read +Cpbr

    Note: The phone number to search should match that stored in phone book. Partial number searching is not supported and will return an error. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 12 – Phone Book Commands Possible Responses +CPBR:1,”6185551212”,145,”test”...

  • Page 86: Avoid Phonebook Init +Waip

    Command syntax: AT+WDCP=”<call phonebook>” Command AT+WDCP? AT+WDCP=? AT+WDCP=”LD” Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WAIP: 1 Note: No phonebook commands are allowed after boot. If a command is entered it returns “+CMEE ERROR: 3”...

  • Page 87: Chapter 13 - Position Determination

    Note: select the last position info available AT+WPDST=9 Note that these 2 errors can happen on all +WPD requests below, and may not be listed. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands ETERMINATION...

  • Page 88: Position Determination Operating Mode +Wpdom

    AT+WPDDD? Note: Request current setting type AT+WPDDD=0,10 Note: single-shot data valid for 10 minutes Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible Responses +WPDOM: 5 +CME ERROR: tbd (PD parameter not supported)

  • Page 89: Position Determination Fix Rate +Wpdfr

    AT+WPPRV? Note: Request current setting type AT+WPPRV=1 Note: Phone will respond to emergency location requests only. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible responses +WPDFR: 10,100 Possible Responses...

  • Page 90: Position Determination Transport Setting +Wptlm

    Command syntax: AT+WPTLM=<setting> Command AT+WPTLM? Note: Request current setting type AT+WPTLM=0 Note: Sets the transport setting to TCP/IP Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible Responses +WPTLM: 1...

  • Page 91: Position Determination Start Session +Wpdss

    Command syntax: AT+WPDES Command AT+WPDES Note: End session Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible Responses +CME: ERROR: tbd (PD session already active) +CME: ERROR: tbd (modem offline)

  • Page 92: Position Determination Start Session Result +Wpdss

    AT+WPDSS=”PV” Note: Ask for position and velocity. AT+WPDSS=”PH” Note: Ask for position and height. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible Responses +WPDSS:#,#,#,#,2 Note: Unsolicited result with position only.

  • Page 93: Set Ip Address Of Gpsone Session +Wpdip

    Command syntax: AT+WPDIP=<port> Command AT+WPDPT? Note: Query current gpsOne port value. AT+WPDPT=4911 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 13 – Position Determination (GPS) AT Commands Possible Responses +WPDIP:192.168.135.124 Note: New gpsOne IP set. Possible Responses +WPDPT: 4911 Note: New gpsOne port value set.

  • Page 94: Chapter 14 - Specific At Commands

    Each neighbor entry consists of the following values: <band class>, [<Pilot PN>], <Frequency Assignment> 4: Timing Advance: Always zero for CDMA 8: Main cell RSSI indication (RxLev) from 0 to 31. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands AT C OMMANDS...
  • Page 95 Activation or deactivation of a +CCED response flow will not affect an existing +CSQ response flow. Likewise, activation or deactivation of a +CSQ response flow will not affect an existing +CCED response flow. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +CCED: (0-2),(1-15)

  • Page 96: Analog Digital Converters Measurements +Adc

    AT+CMER? Note: Display current setting. AT+CMER=1 Note: Enable keypad event reporting. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Battery voltage (+Vbatt) being supplied to the Modem. Thermistor level (internal temperature) of the Modem. Internal test use only.

  • Page 97: Read Gpio Value +Wior

    54, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66. Syntax: Command syntax: AT+WIOW=<index>,<value> Command AT+WIOW=47,1 Set GPIO 47 to 1 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WIOR: 0 GPIO 32 value is 0 Possible Responses...

  • Page 98: Play Tone +Wtone

    Note: Play a tone AT+WTONE? Note: Current value AT+WTONE=0 Note: Stop playing AT+WTONE=? Note: Test command Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses Note: Done +WTONE: 1,1,300,2,50 Note: Done +WTONE: (0-1),(1-2),(1-4000),(0-3),(0-50)

  • Page 99: Play Dtmf Tone +Wdtmf

    Syntax: Command syntax: AT+WHWV Command AT+WHWV Note: Request MSM Version AT+WHWV Note: Request MSM Version Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses Note: Done +WDTMF: 1,”*”,2,10 Note: Note: Done...

  • Page 100: Select Voice Gain +Wsvg

    AT+WSTR=2 Note: Select the status 2 (NETWORK STATUS) AT+WSTR=? Note: Ask the list of possible values Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses Note: Path 1 selected Note: Path 2 selected...

  • Page 101: Ring Indicator Mode +Wrim

    AT+W32K=1 Note: Enable 32kHz sleep mode AT+W32K=0 Note: Disable 32kHz sleep mode Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses Note: up-down RI mode selected Note: pulse RI mode selected...

  • Page 102: Change Default Melody +Wcdm

    Syntax: Command syntax: AT+WSSW Command AT+WSSW Note: Get Software version Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +WCDM: 5,0 Note: Melody n°5 is currently selected, and the buzzer is selected to play it. RING Note: An incoming call occurs, and the melody n°5 is played on the buzzer.

  • Page 103: Custom Character Set +Wccs

    Note: Edit the 5 first characters of the CDMA To Custom conversion table AT+WCCS=1,1,200 Note: Edit character 200 of CDMA To Custom conversion table Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WCCS: 11, 78797A2020202020097E05 Note: 11 characters displayed...

  • Page 104: Cphs Command +Cphs

    Syntax: Command syntax: DP = <player> Command AT+WCDP=? AT+WCDP=0 Select the speaker. AT+WCDP? Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +CPHS: <Status>,<FctId1><CR<LF> +CPHS: (0-2),(1-1) Possible Responses +WCDP : (0-1)

  • Page 105: Reset +Wrst

    Note: Set the volume to Min (muted) AT+WSST? Note: get current standard tones sound level AT+WSST=? Note: Display valid parameter range. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses ERROR +WRST: 1,”001:03”,”001:01”...

  • Page 106: Set Voice Privacy Level +Wprv

    Command AT+WPRV=0 Note: Set to normal voice call AT+WPRV=1 Note: Request a secure voice call ATD18005551212; Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WORG:18005551212 +WCNT:3 +WPRV:1 Note: Voice Privacy is now ON...

  • Page 107: Security Pin +Wpin

    Note: Verify the security PIN AT+WPIN=3,0000 Note: Verify the security PIN AT+WPIN=4,0000 Note: Power up modem lock Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WPIN: 0 Note: PIN disabled...

  • Page 108: Request Prl Version Information +Wprl

    Note: Turn on the alert and set 4 minutes apart AT+WMBP? Note: Request current setting AT+WMBP=? Note: Display valid parameter ranges. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WPRL: 1024 +CME ERROR: 41 Note: PRL request invalid because there’s no PRL loaded.

  • Page 109: Configure Led Indicator +Cled

    AT+WIOW=41,1 Note: Set GPIO state. AT+WIOW=54,1 Note: Set LED2 state. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses CLED: 3 Note: Both GPIO’s are used for modem operational status indicators.

  • Page 110: Keypad Enable/Disable +Wpad

    Note: Display valid parameter range. AT+WPAD? Note: Display current setting. AT+WPAD=0 AT&W Note: Disable keypad and write to NV. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 14 – Specific AT Commands Possible Responses +WPAD (0-1) +WPAD: 1 Note: Keypad enabled.

  • Page 111: Chapter 15 - Sim Toolkit

    The commands used for this operation are: +STIN (SIM Toolkit Indication) +STGI (SIM Toolkit Get Information) +STGR (SIM Toolkit Give Response) Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 15 – SIM TOOLKIT...

  • Page 112: Messages Exchanged During A Sim Toolkit Operation

    The following scheme shows the SIM Toolkit commands and unsolicited results that are exchanged. MULTI-TECH Modem STEP 3: Customer application gets all the information. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C STSF =X,XXXXXXXX STEP 1: Configuration and Activation...
  • Page 113 The +STCR (SIM Toolkit Control response) indication is an unsolicited result sent by the SIM when Call control functionality is activated and before the customer application has performed any outgoing call, SMS, SS, or USSD. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C...

  • Page 114: Sim Toolkit Set Facilities (+Stsf)

    0. (See structure of TERMINAL PROFILE in APPENDIX C) Syntax: Command syntax: AT+STSF=<mode>[,<config>][,<Timeout>][,<AutoResponse>] Command AT+STSF=<Mode>[,<Config>][, <Timeout>][,<AutoResponse>] AT+STSF? Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +CME ERROR: <err> +STSF: <Mode>,<Config>,<Timeout>,<Autoresponse> Chapter 15 – SIM TOOLKIT...

  • Page 115: Error Codes

    99: Indicates that a .End Session. Has been sent from the SIM. (*) if the automatic response parameter is activated, this indication is followed by the corresponding +STGI response. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Enable the reporting of mobile equipment errors Set indications Query ME Status ME is ready.

  • Page 116: Last Sim Toolkit Indication

    Menu. AT+STIN? Note: Ask for the last SIM toolkit indication sent by the SIM. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 15 – SIM TOOLKIT Possible Responses +STIN: 0 Note: the last SIM toolkit indication was...

  • Page 117: Sim Toolkit Get Information +Stgi)

    Get information about ‘Send USSD’ pro-active command Get information about ‘SETUP EVENT LIST’ pro- active command. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 15 – SIM TOOLKIT Possible Responses See following table. +CME ERROR: <err> +STGI: (0-11) Possible Responses +STGI: <Alpha Identifier menu>...
  • Page 118 <HelpInfo> No help information available Help information available <TextInfo> Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Alpha identifier of the main menu Menu item Identifier Number of items in the main menu Alpha identifier label of items in ASCII format Contains a pro-active command identifier.
  • Page 119 Values when Cmd=9 (Send SMS ) <TextInfo> Values when Cmd=10 (Send USSD ) <TextInfo> Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Called party number in ASCII format Called party sub-address in ASCII format Time required expressed in units...

  • Page 120: Unsolicited Result: Sim Toolkit Control Response (+Stcr)

    <MODestAddr> MO destination address in ASCII format <TextInfo> Text information in ASCII format Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Enable the reporting of mobile equipment errors Set indications SIM ToolKit functionality activated with all facilities. The main menu has been sent from the SIM.

  • Page 121: Sim Toolkit Give Response (+Stgr)

    Contains the string of characters entered by the user. For inputs in UCS2 format, the data are entered in ASCII format. Example: 8000410042FFFF entered, the SIM receives 0x00 0x41 0x00 0x42 with UCS2 DCS. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 15 – SIM TOOLKIT...
  • Page 122 Operation not supported. This error is returned when the user gives a response with SIM ToolKit functionality not activated. Or if the SIM Toolkit indication (+STIN) has not been received. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 15 – SIM TOOLKIT...
  • Page 123 For GetInkey with <Result>=1 +STGR=2,1<CR> <Data><Ctrl Z> +STGR=? Note: Display valid parameter range. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C ********* After a short period of time. ******** Possible Responses +CME ERROR: <err> +CME ERROR: <err> +CME ERROR: <err>...

  • Page 124: Chapter 16 - Provisioning At Commands

    Command syntax: AT+WMDN=<number> Command AT+WMDN? Note: Get current mobile directory number AT+WMDN=8585551212 Note: Set mobile directory number to 8585551212 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands AT C OMMANDS Possible Responses ERROR...

  • Page 125: Set Imsi +Wimi

    AT+WSID? Note: Set SID to 64 and NID to 1024. Store in the currently selected location of the SID/NID list. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Possible Responses +WIMI: 310008581111111...

  • Page 126: Access Overload Class +Waoc

    Command syntax: AT+WBGS=< num >,< num >,< num >,< num > Command AT+WBGS? Note: Get current primary gateway AT+WBGS=255,21,255,0 Note: Set secondary gateway to 255.21.255.0 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Possible Responses +WAOC: 5 Possible Responses +WSCI: 2...

  • Page 127: Packet Dial String +Wpds

    AT+WSCC? Note: Get current secondary CDMA channels AT+WPCC=511,632 Note: Set the secondary CDMA channels Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Possible Responses +WPDS: ”#777” Note: Current Packet Dial String is #777...

  • Page 128: Service Option Management +Wsom

    AT+WCMT=1 Note: Commit all changes performed during this provisioning AT session to non-volatile memory. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Possible Responses +WSOM: 0, 1, 2, 0 Note: EVRC disabled, home page is set to EVRC, home orig is set to...

  • Page 129: Read Sid/Nid Entries +Wsnr

    Note: Show last read SID/NID list index. Default: 0. AT+WSNR=? Note: Show SID/NID list index range. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Possible Responses ERROR Note: Service provisioning code not yet entered.

  • Page 130: Service Programming Example

    Note: Set mobile directory number to 8585551212 AT+WCMT=1 Note: Commit all changes performed during this provisioning AT session to non-volatile memory. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 16 – Provisioning AT Commands Response ERROR Note: Service Programming code not yet entered...

  • Page 131: Chapter 17 - Extended At Commands In Is707.3

    Syntax: Command syntax: ATT Command Note: select tone dialing. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 AT C OMMANDS IN Possible Responses Note: Command is valid...

  • Page 132: Select Pulse Dialing P

    Value 255: disable carrier detect ATS11? Note: DTMF tone duration and spacing in milliseconds (value: 50- 255) Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses Note: Command is valid...

  • Page 133: Error Control Operation +Eb

    AT+EFCS? Note: Display the current setting. AT+EFCS=2 Note: Set value to 2. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +EB: 1,0,30 Note: This is the default setting...

  • Page 134: Error Control Report +Er

    Note: Display the current setting. AT+ES=1 Note: Set value to 1. AT+ES? Note: Display the setting after change. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +ER: 0 Note: Command is valid...

  • Page 135: Error Control Selection +Esr

    Note: Display the current setting. AT+ETBM=1 Note: Set value to 1. AT+ETBM? Note: Display the current setting. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +ESR: 0 Note: Command is valid...

  • Page 136: Request Manufacture Identification +Gmi

    Command AT+GMR? Note: Display the current setting. AT+GMR Note: Display the revision Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses ERROR Note: Command is not valid +GMI: MODEM...

  • Page 137: Request Product Serial Number Identification +Gsn

    Command AT+MS? Note: Display the parameter information. AT+MS=? Note: Display the range of parameters Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses ERROR Note: Command is not valid...

  • Page 138: Modulation Automode Control +Ma

    Command AT+MV18R? Note: Display the current setting. AT+MV18R=1 Note: Enable reporting. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +MA: V32, V32B Note: Command is valid +MA: (V32B,V32,V26B,V22B,V22,V21)

  • Page 139: Selection +Mv18S

    Note: Display the current setting. AT+CXT=? Note: Display the range of setting. AT+CXT=1 Note: Enable extension. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +MV18S: 0, 0, 0 Note: Command is valid...

  • Page 140: Configuration String +Cfg

    Note: Display the current code AT+CDR=1 Note: Reporting enabled AT+CDR=? Note: Display the range of code Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +CFG: “” Note: Command is valid...

  • Page 141: U Interface Data Compression +Cds

    Note: Set to 1. Note: This default value for the +CRM parameter shall be 0 if this value is supported by the DCE. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses...

  • Page 142: Battery Charge +Cbc

    AT+CMIP? Note: Display the current setting AT+CMIP? Note: Display the current setting AT+CMIP Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +CBC: 0, 77 Note: Command is valid...

  • Page 143: Base Station Ip Address +Cbip

    AT+CBIP? Note: Display the current setting AT+CBIP? Note: Display the current setting AT+CBIP Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +CBIP: 198.229.142.65 Note: Command is valid Note: No IP address assigned.

  • Page 144: Serving System +Css

    AT+CSS? Note: Display the current setting. AT+CSS=? Note: Display the parameter range. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +CSS: 2, A, 4145, 6, 334 Note: Command is valid...

  • Page 145: Select Multiplex Option +Cmux

    AT+CFC=? Note: Display the range of the setting. AT+CFC=0 Note: Set no compression. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses +CMUX: C, 2 Note: Command is valid...

  • Page 146: Hang-Up Voice +Chv

    AT+ CGCAP Note: Display the current setting. AT+ CGCAP=0 Note: Set the value to 0. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 Possible Responses Note: Command is valid Note: Command is valid...

  • Page 147: Iwf Device Identification +Cgoi

    Note: Display the current setting. AT+CTA=? Note: Display valid parameter range. AT+CTA=1 Note: Set to one second. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 17 – Extended AT Commands in IS707.3 characters. Possible Responses Note: Command is valid.

  • Page 148: Chapter 18 - Fax Parameters

    +FMI EIA/TIA-592 +FMM EIA/TIA-592 +FMR EIA/TIA-592 [+FMS] EIA/TIA-592 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C ARAMETERS IS-707.3 Fax Parameters Description Adaptive-answer parameter (see +FCLASS) Addressing and polling capabilities parameter Phase-C data-bit-order parameter Buffer size parameter (read-only) HDLC-frame-reporting parameter...
  • Page 149 Receive Phase-C data. +FDT Transmit Phase-C data. +FIP Initialize facsimile parameters. +FKS Terminate session. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C IS-707.3 Fax Parameters Description Negotiation-message-reporting control parameters Nonstandard-frame FIF parameter Selective Polling Address Parameter Local-polling-ID-string parameter...

  • Page 150: Chapter 19 - Qualcomm Defined At Commands For Cdma Operation

    Note: Display the current setting AT$QCQNC=? Note: Display the range of values AT$QCQNC=1 Note: Enable QNC compatibility Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation AT C EFINED OMMANDS FOR...

  • Page 151: Protocol Revision In Use $Qcprev

    AT$QCRLPD? Note: Display the current setting AT$QCRLPD Note: Dump RLP statistics data Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 152: Reset Rlp Protocol Statistics $Qcrlpr

    AT$QCIPD? Note: Display the current setting AT$QCIPD Note: Dump IP statistics information Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 153: Reset Ip Protocol Statistics $Qcipr

    AT$QCTCPD? Note: Display the current setting AT$QCTCPD Note: Dump TCP statistics information Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 154: Reset Tcp Protocol Statistics $Qctcpr

    AT$QCCLR? Note: Display the current setting AT$QCCLR Note: Clear the mobile error log Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 155: Answer Incoming Voice Call $Qccav

    AT$QCVAD=? Note: Display the range of values AT$QCVAD=1 Note: Set fax for next call Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses +WCNT: 3 Note: Command is valid...

  • Page 156: Set Dm Baud Rate $Qcdmr

    AT$QCRL3D? Note: Display the current setting AT$QCRL3D Note: Dump RLP 3 statistics information Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCDMR: 19200 Note: Command is valid...

  • Page 157: Reset Rlp 3 Protocol Statistics $Qcrl3R

    AT$QCTRTL =? Note: Display the range of values AT$QCTRTL =0 Note: Set value to 0 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 158: R-Sch Selection $Qcmip

    AT$QCMIP=? Note: Display the range of values AT$QCMIP=0 Note: Set value to 0 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIP: 1 Note: Command is valid...

  • Page 159: Mip Selection $Qcmipp

    AT$QCMIPEP=? Note: Display the range of values AT$QCMIPEP=0 Note: Set value to 0 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPP: 0 Note: User profile 1 is currently used...

  • Page 160: Return Profile Information $Qcmipgetp

    Note: Display the range of accepted character values. AT$QCMIPNAI=myName@myDom ain.com,0 Note: Non-committed value set Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses ERROR Note: Command is not valid...

  • Page 161: Set Reverse Tunneling $Qcmiprt

    Note: Display the range of accepted character values. AT$QCMIPMASS= my5ecretC0de,0 Note: Non-committed value set Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPRT: 1,1 Note: Command is valid...

  • Page 162: Set Mn-Ha Shared Secrets $Qcmipmhss

    AT$QCMIPMASSX=? Note: Display the range of values AT$QCMIPMASSX=FF,0 Note: Set value to 0xFF, but not commit Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPMHSS: Set...

  • Page 163: Set Mn-Ha Shared Secrets $Qcmipmhssx

    Note: Display the range of values AT$QCMIPMASPI=2300,0 Note: Set value to 2300, but not commit Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPMHSSX: Set Note: Command is valid...

  • Page 164: Set Mn-Ha Shared Secrets $Qcmipmhspi

    Note: Display the range of values. AT$QCMIPPHA =10.1.2.15,1 Note: Set to 10.1.2.15, and commit to NV. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPMHSPI: 1234,1...

  • Page 165: Set Secondary Ha Ip Address $Qcmipsha

    Note: Display the range of values. AT$QCMIPHA =10.1.2.15,1 Note: Set to 10.1.2.15, and commit to NV. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation Possible Responses $QCMIPSHA: 10.1.1.20, 0 $QCMIPSHA: ((0-255).(0-255).(0-255).(0-255)),(0-1)

  • Page 166: Chapter 20 - Reference Information

    Non-Volatile Memory failure Invalid WPIN code or WPIN required Invalid WSPC provisioning code OTKSL provisioning code access restricted + Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C EFERENCE NFORMATION Chapter 20 – Reference Information Resulting from the following commands All GSM 07.07 commands (+CME...

  • Page 167: Message Service Failure Result Code: +Cms Error :

    As verbose BUSY ERROR NO ANSWER NO CARRIER RING Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 20 – Reference Information Resulting from the Following Commands All SMS commands (+CMSS, +CMGL, +CPMS… +CMGS, +CMGW +CMGS, +CMGW, +CMSS...

  • Page 168: Intermediate Result Codes

    +FCQ +FCR +IPR +ICF +IFC V24-V25 Commands &C &D Phonebook +WAIP Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Numeric (V0 set) as verbose as verbose as verbose As verbose Enter to Save AT&F X CDMA (n,0 mode)

  • Page 169: Codes For Sms-Status-Report (+Cds And +Cmgr)

    32770 32771 32772 Code Meaning 32773 32774 32775 32776 32777 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Meaning Address vacant Address translation failure Network resource shortage Network failure Invalid Teleservice id Other Network Problem No page response...

  • Page 170: At Commands Supported When Sim Card Removed

    +CMUT ATS0 ATIx +IPR +CNUM +CGSN +CMEE +WPRL +CPOF +CFUN Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C AT Command Note and Explanation +IPR Set modem fixed baud rate +CMEE Display the error code +CCLK Clock management +CBC...

  • Page 171: Chapter 21 - At Command Examples

    Call Connected with CDMA Service Option 3, Traffic channel established. …Conversation… +WEND:6 Call Ended, end reason 6 (Normal Release), the call has been released by the remote party. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C OMMAND XAMPLES Chapter 21 – AT Command Examples...

  • Page 172: Example Of A Call Waiting Situation

    This is the first text line This is the last text line +CMGS: 1 +CDS:2,1,"8582431439",129,"02/05/17,10 :14 :17","02/05/17,10 :14 :27",32768 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Enable the reporting of mobile equipment errors Make a voice call ATD Command is being processed Indication of call origination sent to the Base Station with dialing string 18001234567 Call Connected with CDMA Service Option 3, Traffic channel established.
  • Page 173 OK storage (previously set by AT+CPMS). +CMGR:"REC UNREAD","8585552222","02/05/15,15 :54 :04",1,2,0,”5550000”,15 Test message #2 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C SMS-DELIVERs are stored in NV, SMS-STATUS-REPORTs are routed to TE Select SMS in Chinese language and with Unicode format...

  • Page 174: Chapter 22 - Verizon® Specific At Commands

    +CDS: 1, 3, "03/09/11,14 :52 :53", Message to 8582431438 delivered Note: SMS acknowledge report received. "Message to 8582431438 delivered" is the ack message body. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands ® S...

  • Page 175: Incoming Message Directly Displayed +Cmt (Chapter 3)

    13 – 63: Reserved for Standard Enhanced Roaming Indicator Numbers 64 – 93: Enhanced Roaming Indicator (+WERI response) 94 - 255: Reserved Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses...

  • Page 176: Enhanced Roaming Indication +Weri

    The text is in the format specified in the Character Encoding Type. The text field is limited to a 32 character maximum length. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +WERI: 69,2,0,0,4,2,”Extended Network”...

  • Page 177: Emergency Mode +Wsos (Chapter 3)

    AT+COPS=0,0 Note: While in Emergency Mode, the mode preference is changed, resulting in Emergency Mode being exited Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +WSOS:1 +WORG:911 Note: Unsolicited +WSOS result confirms Emergency Mode is entered...

  • Page 178: Read Message +Cmgr (Chapter 8)

    <cbn>: Call Back Number <length>: Length of the text message (in bytes). <data>: Message text Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Status of Messages in Memory received unread messages...
  • Page 179 AT+CMSS=3 Note: Send an SMS previously stored AT+CMGR=1 Note: Read the SMS Status Report Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +CMTI: “MT”,1 Note: New message received +CMGR: “REC UNREAD”,”8585551212”, ”98/10/01,18 :22 :11+00”,1,2,0,0,0,”8585550000”,9<CR><LF>...

  • Page 180: List Message +Cmgl (Chapter 8)

    AT+CMGL=”SENT” Note: List stored and sent messages in text mode Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Status of Messages in Memory received unread messages received read messages...

  • Page 181: Send Message +Cmgs (Chapter 8)

    Please call ASAP<ctrl-Z> Note: Send a message with the specified priority, privacy, reply option and call back number. Notice length field is omitted. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +CMGS:<mr>...

  • Page 182: Write Message To Memory +Cmgw (Chapter 8)

    Please call ASAP<ctrl-Z> Note: Write message with the specified priority, privacy, reply option and call back number. Notice length field is omitted. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses...

  • Page 183: Service Programming Code +Wspc (Chapter 16)

    AT+WVSS? Note: Get current setting AT+WVSS=0 Note: Set home only AT+WVSS=3 Note: Set automatic-B mode Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses ERROR Note: Invalid request ERROR Note: Invalid request...

  • Page 184: Initial Programming Required +Wot0

    This Over-The-Air Service Provisioning (OTASP) response indicates that the programmed parameters have be successfully committed to NVRAM. Syntax: Response Syntax: +WOTC: “Commit Successful” Command Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +WOT0: “Initial programming required!” Possible Responses +WOT1: “Programming in progress”...

  • Page 185: Spl Unlocked +Wots

    This Over-The-Air Service Provisioning (OTASP) response indicates that the PRL download has completed successfully. Syntax: Response Syntax: +WOTP: “PRL Download OK” Command Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +WOTS: “SPL unlocked” Possible Responses +WOTN: “NAM Download OK”...

  • Page 186: Excess Spc Failures +Wlck

    AT+WPLCK? Note: Request current setting type AT+WPLCK=3 Note: Select lock all Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 22 - Verizon® Specific AT Commands Possible Responses +WLCK: “Excess SPC failures!” Note: Modem now in offline mode.

  • Page 187: Chapter 23 - Sprint® Specific At Commands

    +CDS: 1, 3, "03/09/11,14 :52 :53", Message to 8582431438 delivered Note: SMS acknowledge report received. "Message to 8582431438 delivered" is the ack message body. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands ® S...

  • Page 188: Set Phone Functionality +Cfun

    255: represents an unknown signal quality Syntax: Command syntax: AT+CSQ Command AT+CSQ Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Possible Responses +CSQ: <raw rssi>,<raw Ec/Io>,<fer> Note: <raw rssi>, <raw Ec/lo>, and <fer> as defined below Chapter 23 - Sprint® Specific AT Commands...

  • Page 189: Facility Lock +Clck

    Note: Bar Incoming Calls AT+CLCK=”AO”,9 Note: Query outgoing call barring status Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses +CLCK:(“AO”,1),(“AI”,1),(“PB”,1),(“DT”,1) Note: Outgoing call barring is enabled, Incoming call barring is...

  • Page 190: Mobile Directory Number +Wmdn

    Command syntax: AT+WMDN=<number> Command AT+WMDN? Note: Get current mobile directory number AT+WMDN=8585551212 Note: Set mobile directory number to 8585551212 Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses +WMDN: 8581111111...

  • Page 191: Serving System +Css

    Note: Display the current setting AT+CSS=? Note: Display the range of setting Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses +CSS: 2, A, 4145, 6, 334 Note: Command is valid...

  • Page 192: Packet Zone Identifier +Pzid

    Note: Display the current trusted domain value. AT+WTDMN=https:.iota.spcsdns.net Note: Set the trusted domain value. AT+ WTDMN =”” Note: Set invalid URL value. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses +PZID: 1 Possible Responses http://hcmci.iota.spcsdns.net:8080/ciip...

  • Page 193: Proxy Address +Wdpxy

    Note: Show supported parameters AT+WSSS? Note: Get current setting AT+WSSS=0 Note: Set home only Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses 68.28.31.2 Note: New value set. +CERROR: BAD REQUEST Note: Error message displayed.

  • Page 194: Iota Error +Woae

    Syntax: Command syntax: +WSUM? Command AT+WSUM? Note: Display checksum value. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses +WOAE: “IOTA error 1012” Possible Responses +WOAP: “Preparing Data Services” Possible Responses +WOAR: “Please Retry”...

  • Page 195: Reset Min And Mdn To Factory Defaults +Wrmm

    +WRMM command. Syntax: Command syntax: +WRMM Command AT+WRMM Note: Reset MIN and MDN to factory defaults. Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C Chapter 23 - Sprint® Specific AT Commands Possible Responses Note: Command successful.

This manual is also suitable for:

Mtsmc-c seriesMtmmc-c seriesMtcba-c series

Table of Contents