Chapter 3 — Software Configuration
Selecting the Country through the Global Wizard
Click Start | All Programs |Global Wizard and select Global Wizard. The Global Wizard opens.
1.
Click Next. The Global Wizard searches for your modems and identifies them.
2.
Click Next. Select a modem to configure.
3.
Click Next.
4.
Select the country in which the modem will be used and click Next.
5.
Review your choice of country. If it is correct, click Next to configure the modem.
6.
When Global Wizard announces that the parameters have been set, click Finish to exit.
7.
Using AT Commands to set Country or Region
Non-Windows users can configure the modem using AT commands. You must enter these commands in
your communication program's terminal window. To configure the country/region code, the
initialization string must contain the AT command for your specific country or region.
Run a communications program, such as HyperTerminal.
1.
Type AT%T19,0,nn, where nn is the country/region code in hexadecimal notation.
2.
Click Enter. The message OK displays.
3.
To verify that the correct country/region has been configured, type: ATI9 and click Enter.
4.
The country/region code displays, for example:
Country/Region
Euro/NAM
A list of country/region codes can be found on the Multi-Tech Web site at
http://www.multitech.com/global/approvals.go.
12
AT Command (hexadecimal)
AT%T19,0,34 (default)
Data/Fax Rack Mounted Modem Card Configuration Guide
Result code (decimal)
52