Plu Programming; Add/Change Plu - Sam4s NR-500 Series Operating And Programming Manual

PLU Programming

To accommodate UPC scanning, each PLU can be given an identifying number up to 14
digits in length.

Add/Change PLU

Add/change One PLU
Add/change Range PLU
SAM4S NR-500 Series Manual
1. At the PROGRAM MODE, press 1 and CASH for PLU Programming. The
PLU PROGRAMMING screen displays:
PL U
1. AD D/C HA NG E
2. DE LET E
3. PLU S TO CK
4. NLU C OD E# P GM
1. From the PLU PROGRAMMING screen, Press 1 and CASH to add or change
a PLU screen:
A DD /C HA NGE
1. ONE P LU
2. RAN GE P LU
2. Press 1 and CASH to select individual PLU. The PLU NUMBER screen
displays:
A DD /C HA NGE
EN TER P LU #
3. Enter PLU number and CASH to select individual PLU. The PLU OPTION
screen displays:
4. Refer to "PLU Options - Reference Information" on page 120 to make
program entries or changes, press the CLEAR key to finalize and return to the
previous screen.
5. From the ADD/CHANGE screen, Press 2 and CASH to select RANGE PLU.
The PLU NUMBER screen displays:
A DD /C HA NGE
EN TER F RO M PL U #
6. Enter FROM PLU number and CASH to display TO PLU# screen:
0
0
Program Mode Programming • 119