Setting The Maintenance Performed While The Power Is Turned Off; Setting The Refresh Operation While The Power Is Turned Off - MIMAKI UJV-160 Operation Manual

Setting the Maintenance Performed while the Power Is Turned off

You can perform maintenance on the printer automatically even when the power is turned off.
There are two types of maintenance: Head refreshing and cleaning.
(Supported from the firmware ver.2.40)

Setting the refresh operation while the power is turned off

The printer starts and performs the refresh operation at intervals set beforehand (OFF/10 to 120 minutes)
while the power is turned off. (Sleep refresh function)
• When the sleep maintenance function is enabled, the carriage moves to the flushing tray
while the power us turned off. Do not place any objects on the platen while the power is turned
off.
1
When <LOCAL> is displayed, press the
FUNCTION
2
Select the [MAINTENANCE] with the
key.
3
Select the [
key.
4
Select the [
key, and press the
5
Set the intervals that refresh operations
are performed with the
and press the
• Refresh intervals
OFF
10 ～ 120 : The printer starts and performs the flushing operation automatically at set
6
Select refresh or not for each head, and
press the
(1) Select the head with the
(2) Select refresh or not ("*" marked) with the
7
Press the
4-22
key.
key, and press the
SLP.MAINTENANCE
key, and press the
] with the
REFRESH
ENTER
key.
ENTER
: Refresh operations are not performed while the power is turned off.
intervals (10 to 120 minutes).
key.
ENTER
key to finish.
END
ENTER
] with the
ENTER
key.
key,
key.
key.
< L OC A L . 1 >
F U NC T I ON
MA I N T E N A NC E < E N T >
MA I N T E N A NC E
S L P . MA I N T E N A NC E < e n t >
S L P . MA I N T E N A NC E
R E F R E S H < e n t >
S L E E P R E F R E S H
I N T E R V A L : 6 0 m i n
S L E E P R E F R E S H
H E A D : MMC C Y Y K K