Replacing Of Uv Led Filter - MIMAKI UJV-160 Operation Manual

Replacing of UV LED filter

To use this machine for a long time, clean the UV LED filter periodically (about once a month).
• Put on supplied goggles and gloves. Ink may splash into the eye.
• When a screw is dropped in replacing of the filter, contact a distributor in your district or our
office.
Tools
1
Turn the front power switch off.
• Press the power switch in the front of this machine.
2
Turn the main power switch 1 and 2
OFF on the side of this machine.
• Turn the main power switch 2 off, and then turn
the main power switch 1 off.
3
Remove the cover on the upper left of
this machine.
4
Remove the 2 covers in front of the UV
LED unit.
• UV LED unit filter (SPC-0575)
• Gloves
• Phillips screwdriver
• Paper towel
Main power switch 1
• Goggles
Main power switch 2
4-31
4