MIMAKI UJV-160 Operation Manual page 107

8
Dip the cleaning swab into the cleaning
solution, and clean the side surface of
the head.
• Do not wipe the nozzle face of the head. It may
cause nozzle clogging.
• To buy special cleaning swabs, contact a distributor
in your district or our office.
9
After cleaning, press the
• Initializing starts.
10
Set the covers and the tray removed at
Step 2 and 3.
• In the reverse order of Step 2 and 3, set the front cover, the waste ink tray, and the waste
ink tray cover.
11
Press the
ENTER
key to finish.
END
Avoiding ink dripping at printing
Bottom of the carriage
key.
S T . MA I N T E N A N C E
COMP L E T E D : e n t
4
4-11