Test Drawing - MIMAKI UJV-160 Operation Manual

Test drawing

Make test drawing to check blur or missing caused by nozzle clogging.
• When the following message is displayed, it cannot print. Start drawing after the message has
disappeared.
"WATER NOT READY"
Check before starting

test drawing

1
When <LOCAL> is displayed, press the
2
Select [NOZZLE CHECK] with the
key , and press the
• Select [HARDEN CHECK] to confirm whether the UV ink is cured or not.
(
3
Test drawing starts.
• The machine scans for UV irradiation to cure ink on
the drawn pattern. (
2-34
：The water temperature in the water heating device has not
reached the predetermined value.
• Is media set ?
( P.2-12)
key.
P.3-4)
P.3-23)
• Is the origin position set ?
(
or
key.
ENTER
P.2-30)
< L OC A L . 1 >
T E S T DR AW
NO Z Z L E CH E C K
* * T E S T DR AW * *
< E N T >