Adjusting The Head Height - MIMAKI UJV-160 Operation Manual

Adjusting the head height

Adjust the head height according to the thickness of the media used.
1
Set a media.
• Set a media. (
2
Attach the Y bar handle to turn to the
right.
• Turn the handle to the right to raise the Y bar above
the set media.
3
Move the carriage to the platen.
• When the power is on :
Move the carriage with the
• When the power is off :
Move the carriage with hand.
4
Adjust the height of the Y bar with the
height adjustment stick.
• Pushing the height adjustment stick, turn the Y bar
handle until the top of the stick touches the media
surface.
• Turn the handle to the right to raise the Y bar, and
turn the handle to the left to lower the Y bar.
• Be careful not the media to be lifted.
2-26
P.2-12, P.2-18, P.2-20 )
• To move the carriage, push the handling part.
keys.
( P.2-27)
Height
adjusmtment stick
Carriage