If Dots Misalign - MIMAKI UJV-160 Operation Manual

If dots misalign

When the thickness of the media, the height of the head, the type of the ink used or the dot size of data to
be printed is changed, follow the steps below and adjust the ink drop position for Bi-directional (Bi) printing
to print properly.
Example of Pattern printing
Output
direction
1
Set a media, and then set the printing origin. (
• For printing the pattern, a larger media than 500mm width x 400mm feeding is required.
2
When <LOCAL> is displayed, press the
FUNCTION
3
Select [MAINTENANCE] with the
key, and press the
4
Select [DROP.POScorrect] with the
key, and press the
5
Select resolution with the
and press the
• Resolution ： 300, 600, 1200
6
Select mode with the
press the
• Mode ： Normal, High
7
Select dot size with the
and press the
• Specify the Large dot size of data to be printed in online printing.
Dot size ： 1 to 12
8
Press the
tern drawing.
• Pattern is printed.
3-2
key.
ENTER
ENTER
key.
ENTER
key.
ENTER
key.
ENTER
key to start the pat-
ENTER
A straight line is printed at 140 position in the
positive direction.
In this case, the dot position correction value is 140.
< L OC A L . 1 >
F U NC T I ON
key.
MA I N T E N A NC E
MA I N T E N A NC E
key.
D RO P . PO S c o r r e c t < e n t >
key,
D RO P . PO S c o r r e c t
D P I :
key, and
D RO P . PO S c o r r e c t
MOD E :
key,
D RO P . PO S c o r r e c t
DO T S I Z E L a r g e : 4
D RO P . PO S c o r r e c t
P R I N T S T A R T
P.2-12)
< E N T >
6 0 0
NORMA L
: e n t