When the waste ink tray is full
Waste ink used for head cleaning gathers in the waste ink tray and the wiper tank.
Periodically check the waste ink tray and the wiper tank and when they are full, dispose of the ink.
• If you need a spare waste ink tray/tank, contact a distributor in your district or our office.
• Prepare a polyethylene tank to put in the waste ink.
• When ink is discharging such as for head cleaning, conduct the operation after the discharging
is completed.
• Handle the waste ink tray/tank with care not to spill the waste ink.
• Dispose of the waste ink when it has gathered about half of the waste ink tray.
Tools
Disposing of the ink in the waste ink tray
1
Attach the Y bar handle, and raise the Y
bar.
• Turning the Y bar clockwise, raise the Y bar to the
top to open the space between the waste ink tray
and the ink guard plate.
2
Remove the front cover.
• Remove the 4 screws to remove the cover.
3
Remove the waste ink tray.
• Raise the waste ink tray with the cover, slide it to the
front, and then remove the tray.
4-12
• Phillips screwdriver
• Gloves
• Goggles
Ink guard plate