Head Wiping - MIMAKI UJV-160 Operation Manual

Head Wiping

When turning the power of this machine on, the head is automatically wiped to avoid the dirt of media.
• The wiping starts when the head reaches the set temperature after turning the power on.
• Wiping here is for avoiding stain of the media, therefore the used ink is a very little.
• Until the wiping is finished, do not operate this machine.
1
When <LOCAL> is displayed, press the
FUNCTION
2
Select the [MAINTENANCE] with the
key.
3
Select the [WIPE HEAD] with the
key, and press the
4
Select wiping or not for each head, and
press the
(1) Select the head with the
(2) Select wiping or not ("*" marked) with the
• When not wiping the all heads, select "*" for the all heads.
5
Select the number of wiping, and press
the
ENTER
• Press the
6
Press the
• Wiping starts.
7
When the wiping ends, press the
4-26
key.
key, and press the
ENTER
key.
ENTER
key.
key to select the number of wiping (1 to 9).
key.
ENTER
ENTER
key.
key.
key.
key to finish.
END
< L OC A L . 1 >
F U NC T I ON
MA I N T E N A NC E < E N T >
MA I N T E N A NC E
W I P E H E A D < e n t >
W I P E H E A D
H E A D : MMC C Y Y K K
W I P E H E A D
W I P E NUM . : 1
W I P E H E A D
W I P E S T A R T : e n t