Setting Level Of The Paper Width Sensor - MIMAKI UJV-160 Operation Manual

Setting level of the paper width sensor

To detect media width including transparent film, change the sensitivity of the sensor.
• Even if FINE is set on the sensor level, a wide space between the paper width sensor and the
media can reduce in sensitivity of the sensor and interrupt detection of the media.
1
When <LOCAL> is displayed, press the
FUNCTION
2
Select the [MACHINE SETUP] with the
key.
3
Select the [MEDIA DETECT LV] with the
key.
4
Select [NORMAL] or [FINE] with the
key, and press the
• NORMAL : Normal sensitivity
FINE
5
Press the
3-24
key.
key, and press the
key, and press the
ENTER
: Raises the sensitivity of the sensor.
key to finish.
END
< L OC A L . 1 >
F U NC T I ON
MA CH I N E S E T U P < E N T >
ENTER
MA CH I N E S E T U P
ME D I A D E T E C T L V < e n t >
ENTER
ME D I A D E T E C T L E V E L
key. S E N S OR L V
MACHINE SETUP
: NORMA L