Ink Cartridge; Replacing With A New Ink Cartridge - MIMAKI UJV-160 Operation Manual

Ink cartridge

Replacing with a new ink cartridge

Replace of ink cartridges in the following cases.
Display
< L OC A L . 1 >
I N K N E A R E N D : M _ _ _ _ _ _
< L OC A L . 1 >
I N K E N D : M _ _ _ _ _ _ _
Before replacing ink cartridges, turn the display to <LOCAL> or turn the power off. (
1
Remove an ink cartridge to be
replaced.
2
Set a new ink cartridge.
• As shown in the drawing, set an ink cartridge
turning the IC chip side up.
The ink in an ink cartridge is low.
• Drawing can be continued, but the ink may end during drawing. Early
replacement is recommended.
• The display shown in the left indicates that magenta ink is low.
The ink in an ink cartridge ended.
• Unable to continue drawing. Replace with a new one immediately.
• The display shown in the left indicates that magenta ink ended.
Outline
P.2-4)
IC chip
4
4-5