MIMAKI UJV-160 Operation Manual page 11

Uv inkjet printer
Hide thumbs Also See for UJV-160:
Table of Contents

Advertisement

Power supply and voltage
• This machine contains parts applied high
voltage. Carrying out electrical work by
those
unauthorized
prohibited.
• Be sure to carry out grounding work to
prevent electrical shock.
• Use this machine under the indicated power
specifications.
• The main power switch should be turned on
only by personnel with sufficient knowledge
about operations of this machine.
• Do not switch the voltage selector to a wrong
position.
Switch the voltage according to the used
supply voltage.
110V : This machine ... 100 to 120V
220V : This machine ... 200 to 240V
Handling of the antifreeze liquid
• Use the exclusive antifreeze liquid, or the
water heating device may be damaged.
• If the antifreeze liquid or mixed soft water
with antifreeze liquid gets on the skin or
clothes, immediately wash it off with soap.
If you get the antifreeze liquid or mixed soft
water with antifreeze liquid in your eyes,
immediately wash your eyes with a lot of
clean water. Then, consult a doctor as soon
as possible.
If the hot mixed soft water with antifreeze
liquid gets on the skin, immediately wash it
off with soap and cool with iced water. Then,
consult a doctor as soon as possible.
• Before using the antifreeze liquid, be sure to
read
the Material Safety
(MSDS).
WARNING
Handling of the UV LED unit
for
that
work
is
Data
Sheet
Safety Precautions
• The unit is made of glass. Do not drop, hit
things, apply excessive force or scratch it, or
it may damage the unit.
• Never look at the lighting lamp with your
naked eyes, or it may cause pain in your
eyes or visual impairment. Be sure to wear
goggles.
• Do not apply ultraviolet (UV) light directly to
your skin, or it may cause inflammation on
your skin.
• The performance and the life of the UV LED
unit is greatly affected by the UV LED unit
and the UV power unit.
Be sure to use only the UV LED unit
recommended by Mimaki.
We would take no responsibility for any
troubles caused through the use of a UV
LED unit other than our recommendation.
• If someone swallowed the antifreeze liquid
or mixed soft water with antifreeze liquid
accidentally, try to get to vomit, and then
consult a doctor as soon as possible.
• Discard the waste antifreeze liquid or used
mixed soft water with antifreeze liquid as
follows;
• Absorb in a sawdust or waste cloth, then
incinerate it.
• Entrust to an industrial waste disposal
contractor,
contents.
• Avoid causing ignition with static electricity,
impact spark and so on.
• Be sure to wear goggles and gloves for
handling the antifreeze liquid.
clarifying
their
xi

Advertisement

Table of Contents
loading

Table of Contents