Check first when a trouble occurred
When a trouble occurred, check the followings. If the trouble is not solved after checking, contact a distribu-
tor in your district or our office.
The power is not turned on
It causes for improper connection of the power cable or the computer cable. Check that the cables are
properly connected.
Is the power cable connected to this
machine and to the outlet?
Data is not drawn
It occurs when the data is not sent to this machine properly.
Is the correct interface cable used?
Is the interface cable securely connected
in position?
Is the message of the ink run-out shown
on the display?
Message appears
When [T.NOT READY] appears on the display, the water temperature in the water heating device has not
reached the predetermined value.
[T.NOT READY] is displayed.
5-2
Yes
No
Securely connect the power cable to them.
No
Use the cable exclusive for this machine.
No
Securely connect the interface cable in
position.
Yes
Replace the ink cartridge with a new one.
P.4-5
Wait until the temperature reaches the
predetermined value. When it has
No
reached, the message disappears and
drawing becomes available.