Avoiding Ink Dripping At Printing - MIMAKI UJV-160 Operation Manual

Avoiding ink dripping at printing

Ink droplets from the mist at drawing may arise on the bottom of the carriage. As the ink droplets may drip
and stain the media or cause blur or dot missing, clean the bottom of the carriage periodically.
Tools
1
Turn the power on.
• After initializing, <LOCAL> is displayed.
2
Remove the cover and the waste ink tray.
• See P.4-12 "When the waste ink tray is full".
• When discharging ink for the head cleaning, wait until the discharging is finished, and work.
• Handle the waste ink tray with care not to spill the waste ink in it.
3
When <LOCAL> is displayed, press the
FUNCTION
4
Select the [MAINTENANCE] with the
key.
5
Select the [ST.MAINTENANCE] with the
key.
6
Press the
• The carriage automatically moves from the waiting
position (the left side) to near the waste ink tray on
the right.
• After moving, move the carriage manually.
7
Manually move the carriage onto the waste ink tray on the right.
4-10
• UJ Cleaning swab (SPC-0386)
• Phillips screwdriver
key.
key, and press the
key, and press the
key.
ENTER
• Gloves
< L OC A L . 1 >
F U NC T I ON
MA I N T E N A NC E
ENTER
MA I N T E N A NC E
S T . MA I N T E N A N C E < e n t >
ENTER
S T . MA I N T E N A N C E
C A RR I AG E OU T
• Goggles
< E N T >
< e n t >