Problems Of Drawing Result; Nozzle Clogging - MIMAKI UJV-160 Operation Manual

Problems of drawing result

If the drawing result has a problem, follow the table below. If the problem does not improve after that, con-
tact a distributor in your district or our office.
Problem
Lines / blur
Large ink droplet on media
Media is raised during drawing and the
drawing stops.

Nozzle clogging

If nozzle clogging is not solved after the head cleaning of P.2-36, check the following 2 items.
Execute subtank maintenance with the operation of P.4-25.
Replace ink with the operation of P.4-5.
Check first when a trouble occurred
(1) Execute the head cleaning. (
(2) If there is slips of paper in the head path, remove them.
(1) Execute the head cleaning. (
(2) Remove the dust of the media.
(3) Clean dust on the platen.
(4) Clean the bottom of the carriage. (
(1) Set new media and start printing.
Solution
P.2-36)
P.2-36)
P.4-10)
5
5-3