MIMAKI UJV-160 Operation Manual page 73

9
Correct the dot position of the selected
mode with the
• Correction value ： -400 to 400
• Check the test pattern. A correction value is at the position where an outward way and a
return way are on one line.
• If the correction value is not between -400 and 400, adjust the height of head then redo the
operations from the step 2.
10
Press the
11
Press the
key.
key.
ENTER
key to finish.
END
If dots misalign
DROP . POS c o r r e c t
6 0 0 d p i NORMA L / 4 : 0
3-3
3