MIMAKI UJV-160 Operation Manual page 59

Media detecting method (detecting width manually)
1
Depending on the set media, press the
jog key
2
Specify the right edge position of the
media.
( 1 ) Press the
GIN mark of the carriage with the right edge of
the media.
( 2 ) Press the
• When the carriage is at the waiting position, if you press the
media is automatically detected.
3
Check the position of the media left edge.
( 1 ) The carriage moves to the left edge of the
media depending on the media width set in
"Setting the media width (
( 2 ) Check that the ORIGIN mark of the carriage is at the left edge of the media, and press
the
ENTER
( 3 ) If it is not at the left edge of the media, press the
(The displayed media width is also changed.)
• When you selected "LEAF", the rear edge of the media will be also detected.
• When you set the position on the platen, printing may be performed on the platen.
4
The size of the detected media is
displayed.
• After a while, the mode returns to the local.
and .
keys to match the ORI-
key.
ENTER
P.3-18)".
key.
Setting media
ME D I A S E L E C T
RO L L <
ME D I A W I D T H D E T E C T
R I GH T E DG E P O S .
key, the right edge of the
ENTER
ME D I A W I D T H = 1 6 0 0 mm
L E F T E DG E CH E C K
keys to move the carriage.
* * ME D I A * *
X = * * * * y = * * * *
> L E A F
: e n t
2
: e n t
2-29