Cleaning Swab - MIMAKI UJV-160 Operation Manual

5
Wipe out the dirt of the wiper with the

cleaning swab.

• Wipe the places shown in the right.
6
If sponges are dirty, replace the
sponge.
• Remove the sponge with tweezers or the like,
then set the provided new sponge.
7
Wipe the the dirt of the wiper rubber
with the cleaning swab.
• Wipe the places shown in the right.
• If the dirt is heavy, replace the rubber. (SPA-
0168)
8
After cleaning, press the
• Initializing starts.
9
Press the
4-28
ENTER
key to finish.
END
key.
W I P E R C L E A N
COMP L E T E D
Wiper cleaning
: e n t