Step 5: Running The Data Collection Test - Scantron iNSIGHT 30 Operator's Manual

Chapter 3: Installation
Getting Ready to Scan
60
2.
Select ConfigureScanner Configuration... from
the ScanTools Plus menu. The Scanner Configuration
dialog box appears.
a.
Select iNSIGHT 30 for the Scanner Model.
b.
Make sure that Write Operations Log is selected.
c.
Click the Auto Configure button.
If you get an error, contact Scantron Customer Sup-
port as described in "Requesting Support" on
page 141. Otherwise, click OK to complete scanner
configuration.

Step 5: Running the Data Collection Test

You can run only one of the following programs at a
NOTE:
time because they use the same driver:
• Scan Validation Tool
• Click&Scan
• ScanTools Plus
• the iNSIGHT 30 Scanner Utilities.
Scantron iNSIGHT 30 Scanner