Scantron iNSIGHT 30 Operator's Manual page 108

Operator's Guide
4.
Pull gently on the end of the imaging guide and slowly
remove it from the scanner.
5.
Discard the used imaging guide.
6.
Wipe both sides of the new upper imaging guide (part
number 169 5790) with a fresh staticide wipe (part
number 830 9783).
Always wipe away from the patch to ensure
CAUTION:
that debris is not deposited on the patch.
Do not use an emulsiclean wipe (part number
CAUTION:
137 4966) as this will introduce static which will
collect dust particles.
7.
Dry both sides of the new upper imaging guide with a
dry staticide wipe. When complete, there should be no
smudges on the image guide.
Do not use a paper or cloth towel as these will
CAUTION:
introduce particles into the transport area.
Chapter 4: Maintenance
Replacing the Imaging Guides
Upper
Imaging
Guide
95