Chapter 4: Maintenance - Scantron iNSIGHT 30 Operator's Manual

In this chapter:
Maintenance Schedule. . . . . . . . . . . . . . . . . . . . . page 73
Supplies and Consumables . . . . . . . . . . . . . . . . . page 76
Preparing for Scanner Maintenance . . . . . . . . . . page 78
Cleaning the Separator Module . . . . . . . . . . . . . page 79
Cleaning the Feed Module . . . . . . . . . . . . . . . . . page 81
Cleaning the Drive Rollers and Transport Area page 83
Cleaning the Imaging Guides . . . . . . . . . . . . . . . page 86
Replacing the Feed Module and
Feed Module Tires . . . . . . . . . . . . . . . . . . . . . . page 87
Replacing the Separator Module and
Separator Module Tires . . . . . . . . . . . . . . . . . . page 90
Replacing the Pre-Separation Pad . . . . . . . . . . . page 92
Replacing the Imaging Guides . . . . . . . . . . . . . . page 94
Chapter 4:
Maintenance
Precautions
Scantron iNSIGHT30 Scanner Operator's Guide
Cleaning your scanner and preventative maintenance on a
regular basis is required to ensure the best possible data
quality. Some guidelines follow:
• Do not use canned/compressed air as this can force
dust into difficult to clean areas.
• Use only the recommended cleaning supplies.
• Using unapproved cleaning fluids or solvents may
damage the rubber tires.
• Some document types generate more paper dust and
debris and may require more frequent cleaning than
recommended. Some debris from the rubber tires on
the feed and separator modules is normal. Tire debris
does not always mean that the tires are worn or dam-
4
71