Scantron iNSIGHT 30 Operator's Manual page 82

Operator's Guide
performed. See "Installing the iNSIGHT 30 Driv-
ers and Scanner Utilities Software" on page 42 for
instructions on a complete re-installation.
2.
Click Update/Repair iNSIGHT 30 Drivers and
Scanner Utilities. The Question message box
appears.
3.
Click Yes to remove the current version and install the
update from the CD. A message box appears asking
you to wait while the update is taking place.
4.
When the update routine has completed removing the
outdated components, the Welcome dialog appears.
5.
From this point forward, the update procedure is
identical to the original installation procedure. See
"Installing the iNSIGHT 30 Drivers and Scanner
Utilities Software" on page 42 beginning with step 2
for detailed instructions on how to complete the
update process.
6.
When the Select Option dialog box reappears, the
update is complete. There is no need to re-calibrate
the scanner, or to run the document imaging test.
If, for some reason, the calibration file is missing
NOTE:
when you attempt to exit the Select Option dialog
box, you will be prompted to run the calibration
program. You should do so if you receive that
prompt.
Updating the iNSIGHT 30 Drivers and Scanner Utilities Software
Chapter 3: Installation
69