Scantron iNSIGHT 30 Operator's Manual page 62

Operator's Guide
2.
The Scanner Connection - Step 5 screen appears.
The scanner will go through a series of self tests, and
the indicator LEDs will light.
When the scanner is finished and ready to scan, the
green LED indicator will stop flashing and stay green.
When this occurs, Click Next to continue.
If the green LED indicator does not become a steady
green within several minutes, contact Scantron Cus-
tomer Support as described in "Requesting Support"
on page 141.
3.
The Wizard Complete dialog box appears. Click
Finish to complete driver and utility installation.
Installing the iNSIGHT 30 Drivers and Scanner Utilities Software
Chapter 3: Installation
49