Scantron iNSIGHT 30 Operator's Manual page 71

Chapter 3: Installation
Getting Ready to Scan
58
6.
The main iNSIGHT 30 settings window appears.
a.
Under Setting Shortcuts select Color Docu-
ment
b.
Under Input document is, ensure that Two
Sided is selected.
c.
Click OK.
7.
The Scan Validation Tool window reappears. Place a
two sided color document in the input tray, then click
the Start Scanning button (shown in the margin).
The scanner will scan the document. If both sides of
the document displays properly in the viewer, the
scanner is ready for document imaging use. If you get
an error, contact Scantron Customer Support as
described in "Requesting Support" on page 141.
Scantron iNSIGHT 30 Scanner