Chapter 4: Maintenance
Replacing the Separator Module and Separator Module Tires
Replacing the Separator Module and Separator Module Tires
90
1.
***Remove the separator module by firmly pulling it
down and lifting it off.
2.
If you are replacing the entire separator module, jump
ahead to Step 11 to complete reassembly with the new
separator module. If you are replacing the separator
module tires, continue with the next step.
3.
Holding onto the separation module, rotate the release
lever back so you can access the separation roller.
The separation module is spring-loaded and
CAUTION:
will snap back if you do not hold it in place.
4.
Hold the separator module in this position with one
hand, and use the other hand to remove the separator
roller.
Separator Module
Scantron iNSIGHT 30 Scanner