Connecting The Usb Cable - Scantron iNSIGHT 30 Operator's Manual

Operator's Guide

Connecting the USB Cable

If you have not installed the iNSIGHT 30
CAUTION:
Drivers and Scanner Utilities software, do that
now before proceeding.
The USB cable supplied with your scanner has two
different ends.
5.
Attach the B end of the USB cable to the scanner USB
port, located on the side of the scanner.
6.
Attach the A end of the USB cable to an open high
speed USB 2.0 port on your PC.
Installing the iNSIGHT 30 Drivers and Scanner Utilities Software
Chapter 3: Installation
B
A
47