Scantron iNSIGHT 30 Operator's Manual page 68

Operator's Guide
9.
When front side calibration is complete, the Step 2 of
2... dialog box appears.
Place a stack of Normalization & Calibration Sheets
(part number 202 502 043) into the input tray, printed
side up, and so that the words "Normalization & Cali-
bration Sheet" enter the scanner last (as shown in the
photo below).
Click OK.
10.
The Calibrating back/bottom camera... dialog box
appears. Please wait while the software performs back
side calibration.
11.
When back side calibration is complete, the Verifying
calibration... dialog box appears and the scanner will
Chapter 3: Installation
Getting Ready to Scan
55