Replacing The Feed Module And Feed Module Tires - Scantron iNSIGHT 30 Operator's Manual

Replacing the Feed Module and Feed Module Tires

Latch
Front Drive
Roller Cover
Input Tray
Feed Module
Operator's Guide
1.
Remove the front roller cover by releasing the latch on
the left side and then pulling the cover up and out.
NOTE: You will need to lift the input tray slightly to
remove the front roller cover.
2.
Remove the feed module by pushing it to the right and
lifting it out.
3.
If you are just replacing the feed module, insert the
new feed module by aligning the pins and snapping it
into position.
Chapter 4: Maintenance

Replacing the Feed Module and Feed Module Tires

87