Scantron iNSIGHT 30 Operator's Manual page 85

Chapter 4: Maintenance
72
aged. After cleaning, inspect the tires for wear and
replace the separator module or feed module if neces-
sary.
• When cleaning rollers/tires, allow the rollers/tires to
dry completely before scanning.
• In addition to the recommended cleaning supplies,
you may use a vacuum cleaner to remove debris from
the scanner.
• If a difficulty persists after performing the mainte-
nance recommended in this manual, call Scantron
Customer Support as described in "Requesting Sup-
port" on page 141.
Scantron iNSIGHT 30 Scanner