Scanning Your Documents; Automatic Feeding - Scantron iNSIGHT 30 Operator's Manual

Scanning Your Documents

Operator's Guide
Place the documents you want to scan into the input tray
of the scanner. If you are scanning one-sided documents,
be sure the side you want to scan is facing the input tray
(face down).

Automatic Feeding

To scan a batch of documents, follow the guidelines for
size, type, quantity, etc., as previously described in
"Document Preparation" on page 28.
Remove all staples and paper clips before
CAUTION:
scanning. Staples and paper clips in documents
may damage the scanner and the documents.
1.
Jog the leading edges of the stacked documents.
2.
For data collection also jog the timing mark side of the
stacked documents.
3.
For all documents, position the documents face down
with the leading edge centered in the automatic
document feeder.
Chapter 2: Scanner Basics

Scanning Your Documents

31