Scantron iNSIGHT 30 Operator's Manual page 74

Operator's Guide
In this section you will use ScanTools Plus software to
perform data collection.
1.
If it is not already running, start ScanTools Plus by
selecting StartProgramsScantronScanTools
Plus. The ScanTools Plus window appears.
2.
In the ScanTools Plus window, select 710 - Data
Collection Test in the Application combo box. This
will automatically load the correct selections for Data
file, Edit profile, Score profile, and Conversion profile.
Chapter 3: Installation
Getting Ready to Scan
61