Scantron iNSIGHT 30 Operator's Manual page 143

Chapter 6: Troubleshooting
The Scan Validation Tool Diagnostics Window
Images
130
Flag and Filter are only available for Custom; only make
changes as directed by Customer Support.
For changes to take effect, you must restart your
application.
• Received From Scanner: normally, it is not neces-
sary to save the images received at the PC from the
scanner. It is suggested that you only turn this on
when instructed by Customer Support.
• Held in memory: if scanning a large job and you only
need to save the last few images, then turn this on by
selecting the number of images you want to save.
Turning this on will use more PC memory.
NOTE:
• Sent To Application: normally, you do not need to
save the images received at the scanning application
from the scanner. We recommend that you only turn
this on when instructed by Customer Support.
Scantron iNSIGHT 30 Scanner