Lamps - Scantron iNSIGHT 30 Operator's Manual

Lamps

Software
• ScanTools Plus
• associated data collec-
tion diagnostic software
• Click&Scan
• Scanner Validation Tool
(SVT) document imag-
ing software
Operator's Guide
Lamp warm up and shut off periods vary depending on
the software that you are using. See the table below:
Warm up
5 minutes
20 seconds
If you wish to shut off the lamps sooner than 240
NOTE:
minutes after running a ScanTools Plus application,
simply run Click&Scan or SVT with the Power Saver
Device Setting set to the desired shut off time.
Chapter 6: Troubleshooting
Shut off
240 minutes
0 to 240 minutes based
on Power Saver setting
in Device Settings

Lamps

121