Replacing The Separator Module Tires - Scantron iNSIGHT 20 Operator's Manual

Replacing the Separator Module Tires

Operator's Guide
1.
Remove and inspect the separation module as
described in steps 1 through 2 of "Removing and
Replacing the Separator Module" on page 97.
2.
Holding onto the separation module, rotate the release
lever back so you can access the separation roller.
Use caution as the separation module is spring-
NOTE:
loaded and will snap back if you do not hold it in
place.
Chapter 4: Maintenance

Replacing the Separator Module Tires

99