Registering Stored Programs For Build Job; Deleting Stored Programs - Fuji Xerox ApeosPort-V C7776 User Manual

8 Stored Programming

Registering Stored Programs for Build Job

Up to 100 actions can be registered with one stored program for Build Job. Up to 40 stored
programs can be registered in the machine.
The following describes how to register actions with stored programs.
1
Select [Store Build Job].
2
Select a number to register a stored program.
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies that a stored program is being registered. For information on the
settings, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored Programming Tone" in the Administrator
Guide.
4
Press the <Start> or <Clear All> button.
Note
8
For information on how to name a registered stored program, refer to "Entering/Changing a Stored Program Name" (P.399).

Deleting Stored Programs

The following describes how to delete stored programs.
1
Select [Delete].
2
Select the number to be deleted.
Note
398
• Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.97).
• The machine sounds an audible tone while a stored program is being registered.
• Press the <Interrupt> button to cancel registration.
• An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes "(No Name)".
• Select [
] to return to the previous screen or [
• Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how
to drag or flick, refer to "Touch Screen" (P.97).
] to move to the next screen.
] to move to the next screen.