Configuring Advanced Memory Protection; Saving Rbsu Configuration Settings For Multiple Server Replication - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Server Configuration and Utilities
Table 8-1: RBSU Default Settings
Menu/Option
Set CPU Corrected
Wake On LAN
NMI Debug Button
Custom POST Message
Processor Hyper-Threading

Configuring Advanced Memory Protection

To configure advanced memory protection:
1. Access RBSU by pressing the F9 key during power up when the prompt displays
in the lower right corner of the screen.
2. Select System Options.
3. Select Advanced Memory Protection.
4. Select the desired memory mode.
5. Press the Enter key.
6. Press the Esc key to exit the current menu, or press the Esc key, and then press
the F10 key at the prompt to exit RBSU.
IMPORTANT: To reconfigure the memory after initial setup, you must reboot the system.
Saving RBSU Configuration Settings for Multiple Server
Replication
To save RBSU configuration settings, use the Configuration Replication Utility from
the SmartStart Scripting Toolkit. Saving the configuration enables you to restore
settings at a later date. Use the Configuration Replication Utility from the
SmartStart CD or download the Scripting Toolkit from the website:
www.compaq.com/support/files/server
8-10
continued
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Default Setting
None
(choose 1 or 2)
Disabled
Enabled
None
Enabled