Tire Inspection; Tire Tread Depth; Headlight Lamp Replacement - Linhai LH400ATV-2B Owner's/Operator's Manual

16. MAINTENANCE
1. With the transmission in gear and the parking brake locked, place th wheel
in the correct position on the wheel hub. Be sure the valve stem is toward the
outside and totation arrows on the tire point toward forward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
according to the chart found in
"16.MAINTENANCE/Wheel Nut Torque".

Tire Inspection

When replacing a tire always use original equipment size and type.

Tire Tread Depth

Always replace tires when tread depth is worn to 1/8" (3mm) (1) or less. Please
refer to your Owner's Manual for tire specifications.
16. MAINTENANCE

Headlight Lamp Replacement

WARNING
Keep your headlights and taillights clean. Poor light while riding can result in
an accident causing severe injury or death.
CAUTION
Do not service while headlight is hot. Serious burns may result.
Do not touch a halogen lamp with bare fingers. Oil from your skin leaves a
residue, causing a hot spot which will shorten the life of the lamp.
16. MAINTENANCE
OWNER'S/OPERATOR'S MANUAL
LH400ATV-2B 08.0
16-22