Amp Mixing Reverse(Ampmix Reverse); Amp Mixing Trim(Ampmix Trim); Amp Mixing Et Mode Setting(Ampmix Et Mode Set); Amp Mixing Key(Ampmix Key) - Ko Propo EX-1 Instruction Manual

Amp Mixing Reverse
(AMPMix REVERSE)
Changes the movement direction of the front wheels.
Setting Range
NOR , REV
(Normal) (Reverse)
For electric cars, the throttle is set by the ESC so there is no need
to set this function. However, some older ESCs will not function
properly unless reverse is also set.

Amp Mixing Trim(AMPMix TRIM)

Adjusts the neutral position of the front wheels.
Setting Range -50 - 50%(
The setting position cannot exceed what is set by [High Point] or
[Brake].
( :NOR)
Default
:0%)
Default
Amp Mixing ET Mode Setting
(AMPMix ET MODE SET)
Assigns ET or BT keys to activate the various front wheel drive
modes.
Setting Range ( :OFF)
Default
NORMAL:ON, OFF
BURN :ON, OFF
DIG:ON, OFF
F HOLD:ON, OFF
R HOLD:ON, OFF
Assigning these keys may be convenient for rock crawlers or when
you need to adjust Amp Mixing settings.

Amp Mixing Key(AMPMix KEY)

Assigns ET or BT keys to be used for Amp Mixing.
Setting Range ( :OFF)
Default
MODE :OFF, ET1 - 5, BT1
(AMPMix MODE)
TH HOLD
(AMPMix Throttle Hold)
Convenient for when you need to adjust Amp Mixing settings. It is
also convenient if you are using [MODE] or [TH HOLD] functions.
41
:OFF, ET1 - 5, BT1