Setup(Setup); Direct Switch(Directbt); Adjust Vr (St)(Steeringajustvr) - Ko Propo EX-1 Instruction Manual

Hide thumbs Also See for EX-1:
Table of Contents

Advertisement

Setup(Setup)

Assign a key (ET1- ET5, BT1) to a function.
Setting Range
○:Assignment Possible
ET1 5
OFF(No Assignment)
S:TRIM(Steering Trim)
S:TRAVEL(Steering Travel)
S:TRVLOR(Travel Override)
T:TRIM(Throttle Trim)
T:HIPOINT(Throttle High Point)
T:BRAKE(Throttle Brake)
T:DRAGB(Throttle Drag Brake)
T:BRAKEOR(Throttle Override)
T:ABS(Throttle ABS)
T:ACCEL(Throttle Acceleration)
T:AUTOST(Throttle Auto-Start)
T:IDLEUP(Throttle Idle Up)
STOPWATCH(Stopwatch)
LAPTIME(Lap Time)
DOWNTIME(Countdown Timer)
3:POS(3CH/Control)
3:SMMODE(3CH/4WS Mixing Mode)
3:SMCENT(3CH/4WS Mixing Center)
3:SMTRVL(3CH/4WS Mixing Travel)
3:AMMODE(3CH/Amp Mixing Mode)
3:AMTH(3CH/Amp Mixing Throttle Hold)
3:TMBRAKE(3CH/Throttle Mixing Brake)
3:TMCENT(3CH/Throttle Mixing Center)
3:TMHIPO(3CH/Throttle Mixing High Point)
3:TMDELAY(3CH/Throttle Mixing Delay)
3:TMSTEER(3CH/Throttle Mixing Steering)
3:TMON(3CH/Throttle Mixing ON/OFF)
4:POS(4CH/Control)
4:SMMODE(4CH/4WS Mixing Mode)
4:SMCENT(4CH/4WS Mixing Center)
4:SMTRVL(4CH/4WS Mixing Travel)
4:AMMODE(4CH/Amp Mixing Mode)
4:AMTH(4CH/Amp Mixing Throttle Hold)
4:TMBRAKE(4CH/Throttle Mixing Brake)
4:TMCENT(4CH/Throttle Mixing Center)
4:TMHIPO(4CH/Throttle Mixing High Point)
4:TMDELAY(4CH/Throttle Mixing Delay)
4:TMSTEER(4CH/Throttle Mixing Steering)
4:TMON(4CH/Throttle Mixing ON/OFF)
Default
ET1(S:TRIM) ET2(T:TRIM) ET3(T:BREAK)
ET4(S:TRAVEL) ET5(OFF) BT1(OFF)
ET1 3
ET4
ET5
BT1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
51

Direct Switch(DirectBT)

Assign a direction button (DBT1-DBT4) to a function to
serve as a shortcut button. The default assignments may be
customized.
Setting Range
OFF(No Assignment)
MAIN MENU(Main Menu)
MODEL.M(Model Menu)
STEERING.M(Steering Menu)
THROTTLE.M(Throttle Menu)
QUICK.SET(Quick Setup)
3CH.C(3CH Control Menu)
4CH.C(4CH Control Menu)
TIMER.M(Timer Menu)
FUNCTION.M(Function Menu)
SYSTEM.M(System Menu)
MONITOR(Monitor)
STOPWATCH(Stopwatch)
DOWNTIMER(Countdown Timer)
LAP.HIS(Lap History)

Adjust VR (ST)(SteeringAjustVR)

Adjust the steering steering resistance to offset wear during
use.
Numbers will change as the steering is turned slowly to full left
and right lock. Release the wheel, then select YES (press and
hold ENTER) to adjust or NO to cancel and return to the menu.
(Basic Operation p.15)
Do not operate steering wheel while pressing ENTER, as this may
change the data values and affect subsequent operations. If this
function is not adjusted properly, improper operation may result.
VR Adjust timing may vary depending on usage. If problems persist
even after using VR Adjust, contact KO Propo Customer Service
Department to arrange repairs. (We recommend that you contact KO
Propo Customer Service Department if you are not sure what the
problem is.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents