3Ch/4Ch Menu(3/4Ch Menu); Control Menu(Control Menu); Control Mode(Control Mode); 2Way(2Way) - Ko Propo EX-1 Instruction Manual

3CH/4CH Menu(3/4ch Menu)

3Settings related to 3CH and 4CH operations.
(In order to operate 3CH and 4CH, the response function's OUTPUT
setting must be changed from 2CH to 4CH.)
[Functions]
3CH Control Menu
Adjusts settings related to 3CH.
4CH control Menu
Adjusts settings related to 4CH.
The functions which may be set are the same for both 3CH and
4CH. Set them to match the desired purpose.

Control Menu(Control Menu)

Various settings related to the use of channels 3 and 4 may be
adjusted. You can select from 2WAY, 3WAY, 5WAY, ANALOG,
4WS MIX, AMP MIX, and T-MIX operations, which can be set in
control mode according to the desired purpose.
[Functions]
Control Mode
Set the usage choice for channels 3 and 4.
(select from 2/3/5WAY, ANALOG, 4WS/AMP/TH Mixing)
2WAY
Modify the 2-interval output settings.
3WAY
Modify the 3-interval output settings.
5WAY
Modify the 5-interval output settings.
ANALOG
Modifies settings for analog (continuous) output.
(For example steering and throttle.)
4WS Mixing
Modify settings related to 4-wheel steering.
AMP Mixing
Modify settings related to 4-wheel drive.
T-Mixing
Modify independent settings for brake operation.

Control Mode(Control Mode)

Set the usage choice for channels 3 and 4.
Setting Range ( :OFF)
Default
2WAY
(Modify the 2-interval output settings.)
3WAY
(Modify the 3-interval output settings.)
5WAY
(Modify the 5-interval output settings.)
ANALOG
(Modifies settings for continuous output.)
For example steering and throttle.
4WS-MIX
(Modify settings related to 4-wheel steering.)
AMP-MIX
(Modify settings related to 4-wheel drive.)
T-MIX
(Modify independent settings for brake operation.)

2WAY(2WAY)

Modify the 2-interval output settings.
Example
May be used to activate/deactivate an engine starter unit or a
semi-trailer's support legs.
START position (white square)
Position aside from START (black square)
Setting Range
START:POS 1, POS 2(
Sets the starting position.
KEY:OFF, ET1 - 5, BT1(
Assigns a key to use for switching positions.
POS 1:-100 - 100%(
Default
Sets Position 1's output position.
POS 2:-100 - 100%(
Default
Sets Position 2's output position.
34
,
,
,
,
,
,
:POS 1)
Default
:OFF)
Default
:-100%)
:100%)