Zone Bypassing By User - Teletek electronics ECLIPSE 8 User's Operation Manual

ECLIPSE 8/16/32/99 Series – User Operation Manual

4.4 Zone bypassing by User

Every user can bypass only zones that are associated to areas he is allowed to work with
(arm and/or disarm). Bypassing zones is done in menu "4. ZONE BYPASS" (Address 4)
or by pushing the BYPASS button, after a valid user code has been entered:
OR
Text menu/
User Code Zone User Code Zone
address
Numbers Numbers
Note: Bypassing zones with LED 8 and LED16 keyboards is possible only by entering
address 4, because these keyboards do not have a BYPASS fast button.
Depending on the keyboard used, the visualization on screen is as follows:
LCD 32 and LCD 32 Sensitive (address menus)
Zone is not bypassed Zone is bypassed
Pushing the digit buttons or arrow buttons changes alternatively the state of the zone.
When the user chooses to bypass the zone, the BYPASS button is lit. When return to
normal operation mode, the BYPASS button is lit permanently on all keyboards.
LED 32
Zone is bypassed
Zone is not bypassed
Pushing the digit buttons or arrow buttons changes alternatively the state of the zone.
When the user chooses to bypass a zone the BYPASS button is lit, while digits 1 to 8 of
the display are lit permanently. After going back to normal working mode, the BYPASS
button is lit permanently on all keyboards.
LED 8/LED 16А
Enter at the address 4 and choose a zone number for bypass – the LED for zone 1 is
blinking on the display. If the buttons 1 to 9 are off the zone is not bypassed; if the buttons
1 to 9 are lighting on in red – the zone is bypassed. To change the zone status, press a
random button or the arrows. The BYPASS LED is lit permanently.
The choice is confirmed by pressing the ENTER button.
To check the bypassed zones in the system, see item 3.8.
Note: Certain users may not be permitted to bypass zones. In order for users to bypass
zones option "BYPASS ENB" must be enabled in manager's menu 1. USERS – xx. User
– 02. Options (Address 06 – option 3).
23