Swash Ring - FUTABA T18SZ Instruction Manual

Swash ring

Tap the [Swash ring] button in the Linkage menu to
call the setup screen shown below.
Return to
Linkage menu
The movement range
display shows control
input for elevator and
aileron direction.
The marker represents
the stick's position.
Swash ring setting procedure
1. Push the Swash ring button on the linkage
menu.
2. Push ACT/INH button to activate.
3. Adjust the rate to the maximum amount of
swash plate decline.
Adjustment range: 50 - 200 .
Limits the swash travel within a xed range to prevent linkage damage
(Helicopter only)
Setting the function to
"ACT" will display the
swash ring and [Rate]
percentage.
＜ Linkage menu ＞ 85