Telemetry : Gps [Speed] - FUTABA T18SZ Instruction Manual

Telemetry : GPS [Speed]

Tap the [GPS] button in the Telemetry screen to call
the setup screen shown below.
Return to
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
↑ An upward arrow
indicates the alarm
will sound when the
speed reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
speed reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
Alarm setting when speed increases
1. Tap Alarm and choose from Bu er, Voice, and
Inhibit.
2. When not operating vibrator, it is "Vibrator" to
Inhibit. Type1-3 will be chosen if it is made to
operate.
3. Tap Limit [xxx km/h].
4. Adjust the rate by "
Initial value: 200km/h 0km/h
Adjustment range 0km/h~500km/h
( Limit ≧ Limit)
5. To terminate the input and return to the original
state, push the HOME/EXIT button.
Reference and Distance mode work in conjunction with Distance
discussed on the previous two pages.
" " " " " " " button.
Displaying data from the speed
*A GPS sensor must be installed in the aircraft.
"Vibrator" type
If the following types are selected, the transmitter
will vibrate during the warning.
Type 1
Type 2
Type 3
*Speed alarm precaution
＜ Linkage menu ＞
Speed
A setup of the speed
on which the alarm
operates.
107